Makita 6311DW Руководство по эксплуатации - Страница 10
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Сверло Makita 6311DW. Makita 6311DW 19 страниц. Cordless driver drill equipped with electric brake
Печатать страницу
installing or removing driver bit or drill b i t
CAUTION:
Always be sure
that the
tool
is
switched
off
and
the
battery cartridge
is
removed before
instaliing or removing the bit.
Hold the ring and turn the sleeve counter-
clockwise to open the chuck jaws. Place
the bit in the chuck as far as
it
will go.
Hold the ring firmly and turn the sleeve
clockwise t o tighten the chuck.
To remove the bit, hold the ring and turn
the sleeve counterclockwise.
Switch action
Tool speed
is
increased by increasing pres-
sure on the trigger. To start the tool, simply
pull the trigger. Release the trigger to stop.
I
Sleeve
CAUTION :
Before inserting the battery cartridge into the tool, always check t o see that the switch
trigger actuates properly and returns t o the
"OFF"
position when released.
Reversing switch action
This tool has a reversing switch to change
the direction of rotation. Slide the revers-
ing switch to the left for clockwise rota-
tion or t o the right for counterclockwise.
CAUTION:
0
Always check the direction of rotation before operation.
.Move the reversing switch only after the tool comes t o a complete stop. Changing the
direction of rotation before the tool
stops
may damage the tool.
7