Alien ALR-9800 Руководство по быстрой установке - Страница 2

Просмотреть онлайн или скачать pdf Руководство по быстрой установке для Устройство для чтения карт Alien ALR-9800. Alien ALR-9800 2 страницы.

Quick Hardware Installation

Place the PC, reader, and antenna on a tabletop near two 120 VAC

outlets.

CAUTION: Set up the reader antennas so they are at least 9

inches away from the nearest person who will be in range of the RF

signal for prolonged periods. (See full FCC caution on back page.)

NOTE: When you are not actively using the reader for

demonstration or programming purposes, we recommend you pull

the power connector out of the reader to prevent unnecessary

transmission of RF energy.

Connect an Ethernet cable from the reader to a nearby LAN drop or

network switch. You must use TCP/IP to communicate with the

reader.

Connect an Ethernet to the LAN port on the PC from a nearby LAN

drop or network switch.

Connect the antenna coaxial cables to antenna port 0 and antenna

port 1.

Screw the fitting from the cable end onto the reader connector

clockwise until finger tight to secure the cable to the reader.

Connect the DC power supply to the reader.

Plug the AC power cord into power supply.

Plug the AC power cord into the wall outlet and verify power. The

green LED will be illuminated when power is on.

NOTE: When you are not actively using the reader, we recommend

you pull the power connector out of the reader to prevent

unnecessary transmission of RF energy.

Plug in the PC (if necessary) and turn it on.

10. Launch the desired host software application (such as the Alien

RFID Gateway).

Quick Software Installation

Quit all applications/programs currently running on your PC (except

Windows Explorer).

Place the Alien CD in your CD drive.

The CD will automatically launch the installation application.

Follow the on-screen instructions, clicking "Next" to move to the next

step.

At the "Install Finished" screen, click "Finish".

To launch the Alien RFID Gateway software, double-click on its icon

(located directly on the desktop, and under Start / Programs / Alien

RFID / Gateway / Alien RFID Gateway).

Ant with Alien 350 micron NanoBlock™ IC.