AlienTek DP100 Руководство пользователя - Страница 14

Просмотреть онлайн или скачать pdf Руководство пользователя для Портативный генератор AlienTek DP100. AlienTek DP100 18 страниц. Digital power

The serial number range is 001~200; the voltage setting (V-Set) range is 00.00V~30.00V; the

constant current setting (I-Set) range is 0.000A~5.000A; the delay range is 0001S~9999S; the

number of cycles and the current cycle range are 001~ 999; start serial number, end serial number,

current serial number range 001~200;

Click to start button to execute the sequence output (other interfaces are locked and invalid),

executed sequence numbers shows OK, and unexecuted sequence numbers show waiting. Click

pause button to keep the current serial number output; click continue button to execute the

following sequence according to the delay; click end button to end the sequence output and close

the output.

② Current scan output: The voltage is fixed, the current is scanned and output according to

the step current and delay, which is often used in the constant current mode. The voltage setting

needs to be greater than 0V; the starting current and ending current range is 0.000A~5.000A (if the

starting and ending values are the same, it is invalid); the step current range is 0.001A~5.000A;

the output time is 0001S~9999S;

Click start button to execute scan output (other interfaces are locked and invalid), click stop

button to stop the scan and turn off the output.

③ Voltage scan output: The current is fixed, the voltage is scanned and output according to

the step voltage and delay, which is often used in the constant voltage mode. The current setting

needs to be greater than 0A; the starting voltage and ending voltage range is 00.00V~30.00V (if

the starting and ending values are the same, it is invalid); the step voltage range is 00.00V~30.00V;

the output time is 0001S~9999S;

Click start button to execute scan output (other interfaces are locked and invalid), click stop

button to stop the scan and turn off the output.

5.3 Firmware upgrade interface

DP100 firmware update supports two upgrade modes: local mode and remote mode.

Local mode: Download the firmware you need (.atk file, the download address is in Chapter

7 of this document) from the download link we provided, and then upgrade according to the

operation shown in Figure 5.3.2.

Remote mode: ATK-DP100 automatically obtains the latest firmware from the server and

prompts the firmware version, without downloading the latest firmware by yourself. Other

operations are the same as in local mode.

The remote mode upgrade process is shown in Figure 5.3.1 (requires networking):

User Manual

DP100 Digital Power User Manual

High Performance Digital Power