AlienTek T12 Руководство пользователя - Страница 15
Просмотреть онлайн или скачать pdf Руководство пользователя для Паяльный пистолет AlienTek T12. AlienTek T12 16 страниц. Smart soldering station
Печатать страницу
ALIENTEK
8. Maintenance
note:
When the new tip is used for the first time, it is necessary to heat the tin to 250 ° C first to
prevent dry burning oxidation!
When the new tip is used for the first time, there will be a temperature jump problem,
which will stabilize after a few hours of use!
After the soldering iron is used, apply proper tin to the tip of the soldering iron to prevent
oxidation before disconnecting the power supply.
The tip of the soldering iron works normally at a temperature of about 300 to 380 ° C. Do not
use it for a long time (more than 420 ° C) to avoid the effect of dry burning on the life of the
tip.
Do not force the tip when welding.
If the surface of the tip is not oxidized, use a cloth or other tool to carefully wipe the surface
layer, then heat it to 200 ° C and immediately apply tin to the surface to prevent re-oxidation.
9. Precautions
Do not drop or hit the machine!
Do not get the machine wet or use it in a humid environment to avoid the risk of electric
shock due to short circuit in the internal circuit!
The temperature of the soldering station can reach 100~500 ° C during normal operation. Do
not touch the soldering iron!
When replacing the tip, turn off the power and replace it when the tip is cooled to room
temperature!
Never connect the handles of other manufacturers to this soldering station! Different
manufacturers handle interface definitions are different!
There is a high voltage circuit in the soldering station, so don't disassemble it!
T100 Smart Soldering station
13
User Manual