a&p instruments UX 3081WQ Руководство по эксплуатации - Страница 8

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Измерительные приборы a&p instruments UX 3081WQ. a&p instruments UX 3081WQ 20 страниц. Moisture analysers

Operating instructions for moisture analysers
UX 3081
UX 3081WQ
temp. C°
time
mode
value (weight)
unit
3.
Start of query in minutes
Specify the drying period required for the samples without automatic mode. The factory-set 3 minutes
are usually adequate. This value should be increased for extremely low temperatures, so that the device
does not switch itself off prematurely. This affects the UX 3031 in particular, when free moisture is being
measured at 45°C. You can select 1-99 mins.
temp. C°
time
unit
mode
value (weight)
temp. C°
time
unit
mode
value (weight)
The timer setting is the same as described for the quartz heater.
temp. C°
time
mode
value (weight)
unit
temp. C°
time
mode
value (weight)
unit
It is possible to select a drying time of 1 – 180 mins
The automatic settings are the same as described for radiant heaters.
temp. C°
Measurement
unit
mode
temp. C°
time
unit
mode
value (weight)
During measurement, the device optionally displays:
% moisture
% dry matter (TS)
% moisture Atro ( ), i.e. moisture related to the dry matter
Dry matter (TS) in g/1000g
Weight loss g (V)
Residual weight g (R) (current weight)
a&p instruments, Kluckhofer Weg 61, D-32657 Lemgo, Tel.:05232 97780, Fax.: 977820
E-Mail: [email protected], Internet: www.apinstruments.de
set
up
set
down
temp. C°
esc
mode
value (weight)
temp. C°
set
mode
value (weight)
up
temp. C°
set
down
mode
time
set
unit
value (weight)
up
set
down
mode
temp. C°
time
mode
value (weight)
unit
time
down
unit
up
time
set
down
unit
time
esc
value (weight)
unit
temp. C°
time
esc
value (weight)
unit
Example: 50 % moisture = 100 % Atro
25 % moisture = 33.3 % Atro
75 % moisture = 300 % Atro
esc
temp. C°
time
set
mode
value (weight)
unit
temp. C°
time
esc
unit
mode
value (weight)
temp. C°
time
mode
value (weight)
unit
Seite 8
down