AEG 944 187 934 Руководство пользователя - Страница 16
Просмотреть онлайн или скачать pdf Руководство пользователя для Печь AEG 944 187 934. AEG 944 187 934 48 страниц.
- 1. Table of Contents
- 2. Safety Information
- 3. Safety Instructions
- 4. Product Description
- 5. Control Panel
- 6. Before First Use
- 7. Daily Use
- 8. Clock Functions
- 9. Automatic Programmes
- 10. Using the Accessories
- 11. Additional Functions
- 12. Hints and Tips
- 13. Care and Cleaning
- 14. Troubleshooting
- 15. Energy Efficiency
16
www.aeg.com
When the set time ends, an acoustic
signal sounds for two minutes.
flashes.
6. Touch a sensor field or open the door
to stop the acoustic signal.
9. USING THE ACCESSORIES
WARNING!
Refer to Safety chapters.
9.1 Food Sensor
Food Sensor - measures the
temperature inside the food. When the
food is at the set temperature, the oven
turns off.
Set 2 temperatures:
• the oven temperature: minimum
120 °C,
• the food core temperature.
For the best cooking results:
• Ingredients should be at the room
temperature.
• Food Sensor - do not use it with liquid
dishes.
• Food Sensor - during cooking it must
remain in the dish.
The oven calculates the approximate
cooking time, it may change during
cooking.
When you put the accessory into the
socket, you cancel the settings for the
clock functions.
Food categories: meat,
poultry and fish
1. Activate the appliance.
2. Insert the tip of the core temperature
sensor (with
the centre of the meat or fish, in the
thickest part as possible. Make sure
that at least 3/4 of the core
temperature sensor is inside of the
dish.
3. Put the plug of the core temperature
sensor into the socket located in the
front frame of the appliance.
on the handle) into
7. Deactivate the appliance.
The display shows
default set core temperature. The
temperature is 60 °C for the first
operation, and the last set value for each
subsequent operation.
4. Touch
or
temperature.
5. Touch
or the settings save
automatically after 5 seconds.
You can set the core
temperature only when
flashes. If
display but does not
flash before you set the
core temperature, touch
and
or
a new value.
6. Set the oven function and the oven
temperature.
flashing and the
to set the core
is in the
to set