Garmin 010-N1858-02 Руководство пользователя - Страница 27
Просмотреть онлайн или скачать pdf Руководство пользователя для GPS Garmin 010-N1858-02. Garmin 010-N1858-02 35 страниц.
Печатать страницу
Setting a Simulated Location
If you are indoors or not receiving satellite signals, you can use
the GPS simulator to plan routes from a simulated location.
1
Select Settings > Navigation > GPS Simulator.
2
From the main menu, select View Map.
3
Tap the map twice to select an area.
The address of the location appears at the bottom of the
screen.
4
Select the location description.
5
Select Set Location.
Wireless Network Settings
The wireless network settings allow you to manage Wi‑Fi
networks, paired Bluetooth devices, and Bluetooth features.
Select Settings > Wireless Networks.
Bluetooth: Enables Bluetooth wireless technology.
Paired Device Name: The names of paired Bluetooth devices
appear in the menu. You can select a device name to change
Bluetooth feature settings for that device.
Search for Devices: Searches for nearby Bluetooth devices.
Friendly Name: Allows you to enter a friendly name that
identifies your device on other devices with Bluetooth
wireless technology.
Wi-Fi: Enables the Wi‑Fi radio.
Saved Networks: Allows you to edit or remove saved networks.
Search for Networks: Searches for nearby Wi‑Fi networks
‑ Fi Network, page
(Connecting to a Wi
Driver Assistance Settings
Select Settings > Driver Assistance.
Audible Driver Alerts: Enables an audible alert for each type of
driver alert
(Driver Awareness Features and Alerts, page
Fatigue Warning: Alerts you when you have been driving for a
long period without a break.
Proximity Alerts: Alerts you when you are near custom points
of interest or red light cameras.
NOTE: You must have custom points of interest (POIs)
loaded for proximity points alerts to display. This feature is
not available in all areas.
Backup Camera Settings
The backup camera settings allow you to manage paired
Garmin backup cameras and camera settings. This menu
appears on your navigation device only when the device is
connected to a wireless camera receiver cable. See the owner's
manual for your backup camera for detailed information about
pairing cameras and camera settings. Go to
/backupcamera
to purchase a Garmin backup camera.
Select Settings > Backup Camera, and select a paired camera.
Unpair: Removes the paired camera. You must pair the camera
again before you can view it using this device and cable.
Rename: Allows you to rename the paired camera.
Guidance Lines: Shows or hides guidance lines and allows you
to adjust the position of the guidance lines.
Display Settings
Select Settings > Display.
Orientation: Allows you to set the display to portrait (vertical) or
landscape (horizontal).
NOTE: This feature is not available on all product models.
dēzl Settings
Color Mode: Allows you to select day or night color mode. If you
Brightness: Allows you to adjust the display brightness.
Display Timeout: Allows you to set the amount of idle time
Screenshot: Allows you to take a picture of the device screen.
Traffic Settings
From the main menu, select Settings > Traffic.
®
Traffic: Enables traffic.
Current Provider: Sets the traffic provider to use for traffic data.
Subscriptions: Lists the current traffic subscriptions.
Optimize Route: Enables the device to use optimized alternate
Traffic Alerts: Sets the traffic delay severity for which the
Units and Time Settings
To open the Units and Time settings page, from the main menu,
select Settings > Units & Time.
Current Time: Sets the device time.
22).
Time Format: Allows you to select a 12-hour, 24-hour, or UTC
Units: Sets the unit of measure used for distances.
Position Format: Sets the coordinate format and datum used
3).
Setting the Time
1
2
Language and Keyboard Settings
To open the Language and Keyboard settings, from the main
menu, select Settings > Language & Keyboard.
Voice Language: Sets the language for voice prompts.
Text Language: Sets all on-screen text to the selected
garmin.com
Keyboard Language: Enables keyboard languages.
Proximity Alerts Settings
NOTE: You must have custom points of interest (POIs) loaded
for proximity points alerts to display.
NOTE: This feature is not available in all areas.
Select Settings > Proximity Alerts.
Audio: Sets the style of alert that plays when you approach
Alerts: Sets the type of proximity points for which alerts are
select the Auto option, the device automatically switches to
day or night colors based on the time of day.
before your device enters sleep mode while using battery
power.
Screenshots are saved in the Screenshot folder of the device
storage.
The Auto option selects the best available traffic data
automatically.
routes automatically or upon request
on Your Route, page
5).
device displays a traffic alert.
display time.
for geographical coordinates.
From the main menu, select the time.
Select an option:
• To set the time automatically using GPS information,
select Automatic.
• To set the time manually, drag the numbers up or down.
language.
NOTE: Changing the text language does not change the
language of user-entered data or map data, such as street
names.
proximity points.
played.
(Avoiding Traffic Delays
21