A+V Link Technologies PowerHDLink AVM-6986H-SYS-A1 Руководство по быстрой настройке - Страница 6
Просмотреть онлайн или скачать pdf Руководство по быстрой настройке для Приемник A+V Link Technologies PowerHDLink AVM-6986H-SYS-A1. A+V Link Technologies PowerHDLink AVM-6986H-SYS-A1 8 страниц.
Печатать страницуA+V Link Technologies
PowerHDLink Quick Setup Guide
Step 1: Attach IR Blaster Cable to Tx
Connect the IR Blaster Cable to the back of the Transmitter (IR Out-
1 adapter).
Step 2: Place IR Blaster Tab
Situate the IR Blaster tab in front of the Video Player IR sensor or
use the double sided sticker on the tab and stick it onto the Video
Player, near the IR sensor.
The setup is complete. You can try the remote controller on the
Receiver.
5 PowerHDLink Remote Controller
The PowerHDLink system comes with its own
Remote Controller Unit that is designed to
control the Transmitter and Receiver. The
Top Row
Remote Controller can manipulate the Tx
locally or from a remote location (i.e. where
receiver is located). The receiver accepts IR
signals from the Remote Controller and
passes them to the transmitter through the
power lines.
The Remote Controller can also bring up and
manipulate the OSD Menu on the TV attached
to the Rx. It can also adjust the audio volume
on the receiver.
The Remote Controller panel is separated into
4 areas (Top Row, Source Area, Setting Area,
and Volume Area) as shown below:
6
©2009-2011 Copyright by A+V Link Technologies, Corp.
Version 2.2