Garmin Zumo 590 Руководство пользователя - Страница 11
Просмотреть онлайн или скачать pdf Руководство пользователя для GPS Garmin Zumo 590. Garmin Zumo 590 26 страниц. Zumo 590
Также для Garmin Zumo 590: Руководство пользователя (26 страниц), Краткое руководство по эксплуатации (6 страниц), Руководство по установке (36 страниц), Руководство по установке (46 страниц)
Печатать страницу
If you decide not to go to the next point in your route, you can
skip the point. This prevents the device from attempting to route
you back to the missed point. This feature is not available when
the next point is your final destination.
From the map, select
Taking a Detour
Before you can take a detour, you must be navigating a route
and you must add the change route tool to the map tools menu
(Customizing the Map Tools, page
You can take a detour for a specified distance along your route
or detour around specific roads. This is useful if you encounter
construction zones, closed roads, or poor road conditions.
1
From the map, select
2
Select an option:
• To detour your route for a specific distance, select Detour
by Distance.
• To detour around a specific road on the route, select
Detour by Road.
Stopping the Route
From the map, select
Using Suggested Routes
Before you can use this feature, you must save at least one
location and enable the travel history feature
Privacy Settings, page
17).
Using the myTrends
™
feature, your device predicts your
destination based on your travel history, the day of the week,
and the time of day. After you have driven to a saved location
several times, the location may appear in the navigation bar on
the map, along with the estimated time of travel, and traffic
information.
Select the navigation bar to view a suggested route to the
location.
About Up Ahead
You can view upcoming businesses and services along your
route or the road on which you are traveling.
Services are listed under tabs by category.
Gas
Food
Lodging
Restrooms
Parking
Banks and ATMs
Finding Upcoming Points of Interest
1
From the map, select
2
Select a tab.
3
Select a point of interest.
Avoiding Road Features
1
Select Settings > Navigation > Avoidances.
2
Select the road features to avoid on your routes, and select
Save.
About Custom Avoidances
Custom avoidances allow you to avoid specific areas and
sections of road. You can enable and disable custom
avoidances as needed.
Avoiding an Area
1
Select Settings > Navigation > Custom Avoidances.
Navigation
> Skip.
16).
> Change Route.
>
.
(Device and
> Up Ahead.
2
If necessary, select Add Avoidance.
3
Select Add Avoid Area.
4
Select the upper-left corner of the area to avoid, and select
Next.
5
Select the lower-right corner of the area to avoid, and select
Next.
The selected area is shaded on the map.
6
Select Done.
Avoiding a Road
1
Select Settings > Navigation > Custom Avoidances.
2
Select Add Avoid Road.
3
Select the starting point of the section of road to avoid, and
select Next.
4
Select the ending point of the road section, and select Next.
5
Select Done.
Disabling a Custom Avoidance
You can disable a custom avoidance without deleting it.
1
Select Settings > Navigation > Custom Avoidances.
2
Select an avoidance.
3
Select
> Disable.
Deleting Custom Avoidances
1
Select Settings > Navigation > Custom Avoidances.
2
Select an option:
• To delete all custom avoidances, select
• To delete one custom avoidance, select the avoidance,
and select
> Delete.
Navigating Off Road
If you are not following roadways as you navigate, you can use
Off Road mode.
1
Select Settings > Navigation.
2
Select Calculation Mode > Off Road > Save.
The next route will be calculated as a straight line to the
location.
Fuel Tracking
You can set your device to estimate your fuel usage, warn you
when you approach the maximum estimated fuel distance, and
suggest fuel stops based on your estimated fuel range. When
fuel tracking is enabled,
White: Fuel tracking is disabled, or the device is not connected
to the motorcycle mount.
Green: The estimated fuel range is above the fuel tank warning
level.
Orange: The estimated fuel range is below the fuel tank warning
level.
Red: The estimated distance remaining on the tank is 0.
Enabling Fuel Tracking
Before you can enable fuel tracking, the device must be in
motorcycle mode or off road mode and placed in the motorcycle
mount.
When you enable fuel tracking, a fuel gauge appears on the trip
computer
(Viewing the Trip Information Page, page
1
Fill your fuel tank.
2
Select Apps > Fuel Settings > Fuel Tracking.
3
Select Distance Per Tank.
4
Enter the distance the vehicle travels on a tank of gas and
select Done.
.
indicates the current fuel status.
8).
7