Customizing the zūmo
Changing Bluetooth
Technology Settings
Tools
Settings
> Bluetooth.
Touch
>
Phone or Audio—select
Add
with a device that has Bluetooth wireless
technology. To listen to high-quality audio
wirelessly, connect to a Bluetooth headset.
See
pages
14–15. Select
Change
connect with a different device. The zūmo
PIN code (or passkey) is 1234.
Drop—select the device you want to
disconnect, and touch Yes.
Remove—select the device you want to
delete from the zūmo memory, and touch
Yes.
Bluetooth—enable and disable the
Bluetooth component. The
icon appears on the Menu page if the
Bluetooth component is enabled. To prevent
a device from automatically connecting,
select Disabled.
Friendly Name—enter a friendly name
that identifies your zūmo on devices with
Bluetooth technology. Touch Done.
Restore—restore the original Bluetooth
>
OK
to pair
settings. This does not clear the pairing
information.
Changing the Proximity
to pair and
Points Settings
You must have proximity points (such as
custom POIs, a safety camera database,
or a TourGuide
proximity point settings. See
Touch
Tools
Proximity Alerts—touch
or off the alerts when you approach custom
POIs or safety cameras.
Bluetooth
TourGuide—set how you want the audio for
TourGuide to be activated. Select
to hear the complete tour as programmed,
Prompted
file) loaded to adjust the
®
pages
29–31.
>
Settings
>
Proximity
Points.
Change
to turn on
Auto Play
to show the
speaker icon on
the map when tour information is available
during your route, or Off.
Restore—restore the original proximity
points settings.
Restoring All Settings
1. Touch
Tools
> Settings.
2. Touch Restore.
3. Touch Yes.
Clearing User Data
NOTICe
This deletes all user-entered information.
1. Hold your finger on the lower‑right corner
of the zūmo screen while turning on the
zūmo.
2. Keep your finger pressed until the
message appears.
3. Touch
Yes
to clear all user data.
All original settings are restored. Any items
that you have saved are erased.
Road Tech
zūmo 660 Owner's Manual
™
Печатать страницу