Garmin Descent MK1 Руководство пользователя - Страница 9
Просмотреть онлайн или скачать pdf Руководство пользователя для Смотреть Garmin Descent MK1. Garmin Descent MK1 46 страниц.
Печатать страницу
When you return to the surface, the device automatically ends
and saves the dive.
Viewing the Depth Screen
1
During a gas dive, scroll to the depth screen.
Your nitrogen (N2) tissue load level.
Green - 0 to 79% tissue load.
Orange - 80 to 99% tissue load.
Red - 100% tissue load.
Your rate of descent or ascent.
Green - Good. Ascent is less than 7.9 m (26 ft.) per min.
Orange - Moderately high. Ascent is between 7.9 and 10.1 m
(26 and 33 ft.) per min.
Red - Too high. Ascent is greater than 10.1 m (33 ft.) per
min.
Your partial pressure of oxygen (PO2) level.
2
When you start your ascent, scroll to the depth screen (if
necessary).
The safety stop ceiling depth.
The safety stop time remaining.
Viewing the Dive Heart Rate Screen
During a gas or gauge dive, scroll to the heart rate screen.
Your current heart rate zone
page
14).
NOTE: You can only view wrist heart rate monitor data during a
dive.
Gray - Zone 1.
Blue - Zone 2.
Green - Zone 3.
Orange - Zone 4.
Red - Zone 5.
Your central nervous system (CNS) oxygen toxicity level during
a gas dive.
Green - 0 to 79% CNS oxygen toxicity.
Orange - 80 to 99% CNS oxygen toxicity.
Red - 100% CNS oxygen toxicity.
Navigating with the Dive Compass
1
During a dive, scroll to the dive compass.
Diving
(About Heart Rate Zones,
The compass indicates your directional heading
2
Select
to set the heading.
The compass indicates deviations
3
Select
, and select an option:
• To reset the heading, select Reset Heading.
• To change the heading to the reciprocal heading, select
Set to Recip.. The compass indicates the reciprocal
heading with a red mark.
• To set to a 90-degree heading left or right, select Set to
90L or Set to 90R.
• To clear the heading, select Clear Heading.
Using the Dive Stopwatch
1
Start a Gauge dive.
2
Scroll to the stopwatch screen.
3
If necessary, select
> Reset Avg. Depth to set the
average depth to your current depth.
4
Select
> Start Stopwatch.
5
Select an option:
• To stop using the timer, select
• To restart the timer, select
Diving with the Map
You can view the map during apnea surface intervals.
1
During an apnea dive activity, scroll to the map.
2
Select
, and select an option:
• To pan or zoom the map, select Pan/Zoom.
TIP: You can select
down, panning left and right, or zooming. You can hold
to select the point indicated by the crosshairs.
• To mark your location, select Save Location.
TIP: You can select DOWN to change the icon.
Viewing the Surface Interval Widget
The widget displays your surface interval time, tissue load, and
central nervous system (CNS) oxygen toxicity percentage.
1
From the watch face, select UP.
2
Select
to view tissue details and oxygen tolerance units
(OTU).
Viewing the Dive Log Widget
The widget displays a brief summary of your last recorded dive.
1
From the surface interval widget, select UP.
2
Select
to view more information about a dive.
.
from the set heading
> Stop Stopwatch.
> Reset Stopwatch.
to toggle between panning up and
.
3