Garmin GNS 530 Дополнение к руководству пилота - Страница 23

Просмотреть онлайн или скачать pdf Дополнение к руководству пилота для Автомобильная навигационная система Garmin GNS 530. Garmin GNS 530 27 страниц. Supplement a21 to the airplane flight manual da 40 diamond com/nav/gps
Также для Garmin GNS 530: Руководство пилота (22 страниц), Руководство по эксплуатации (6 страниц), Дополнение к руководству пилота (4 страниц), Краткая справка (16 страниц), Брошюра (1 страниц), Краткая справка (23 страниц), Дополнение к руководству пилота (22 страниц), Руководство по установке (14 страниц), Руководство (35 страниц)

Печатать страницу
Garmin GNS 530 Дополнение к руководству пилота

TCAD Setup Page

The Ryan TCAD Setup Page is accessed from the Traffic Page. The TCAD Setup Page allows you to
configure traffic data. The definitions of the available options are listed in the TCAD Pilot' s Handbook.
To change a TCAD setup option:
1. Turn the small right knob to select the Traffic Page. Press MENU to display the Page Menu. Turn the small
right knob to select 'Setup?' and press ENT.
2. The flashing cursor highlights the Mode field. Turn the small right knob to select the mode and press ENT.
The mode selection determines which shield definition to display and change. Turn the large right knob to
select the desired remaining options fields. Turn the small right knob to select the desired option and press
ENT.
3. Return to the Traffic Page by pressing CLR.
Traffi c Page Fields
There are two selectable fields on the Traffic Page: the Operating Mode Field and the Barometric
Pressure Field. The Operating Mode Field selects the TCAD operating mode. Please, refer to the TCAD
Pilot' s Handbook for a complete description of all modes of operation. For the 9900BX model, this field is
replaced with the SKYWATCH style altitude mode.
To select the Operating Mode:
1. From the Traffic Page, press CRSR to highlight the operating mode field. Turn the small right knob to select
the desired operating mode and press ENT.
The traffi c display range is automatically set to the shield size and cannot be changed
(9900B only).
Section 4
Ryan TCAD Interface
Ryan TCAD Setup Page (9900B only)
21