Garmin nuvi 660 Руководство пользователя - Страница 5

Просмотреть онлайн или скачать pdf Руководство пользователя для Автомобильная навигационная система Garmin nuvi 660. Garmin nuvi 660 26 страниц. Navigator, communicator, entertainer, translator
Также для Garmin nuvi 660: Краткое справочное руководство (2 страниц), Информация о безопасности и продукции (32 страниц), Информация о продукте (4 страниц), Декларация о соответствии (1 страниц), Технические характеристики (2 страниц)

Garmin nuvi 660 Руководство пользователя
Getting Started
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
• Update the maps and software on your device.
• Mount the device in your vehicle and connect it to power
(Connecting the Device to Vehicle
• Acquire GPS signals
(Acquiring GPS
• Adjust the volume
(Adjusting the
brightness
(Adjusting the Screen
• Set up a vehicle profile for your camper
Profile).
• Navigate to your destination
Connecting the Device to Vehicle Power
This product contains a lithium-ion battery. To prevent the
possibility of personal injury or product damage caused by
battery exposure to extreme heat, store the device out of direct
sunlight.
Before you use your device on battery power, you should charge
it.
1
Plug the vehicle power cable
device.
2
Press the mount
onto the suction cup
place.
3
Press the suction cup to the windshield, and flip the lever
back toward the windshield.
4
Fit the tab on the top of the mount into the slot on the back of
the device.
5
Press the bottom of the mount into the device until it clicks.
6
Plug the other end of the vehicle power cable into a power
outlet in your vehicle.
Acquiring GPS Signals
To navigate with your device, you must acquire satellites.
the status bar indicates the satellite signal strength. Acquiring
satellites can take several minutes.
1
Turn on the device.
2
Wait while the device locates satellites.
3
If necessary, go outdoors to an open area, away from tall
buildings and trees.

Status Bar Icons

The status bar is located at the top of the main menu. The status
bar icons display information about features on the device. You
can select some icons to change settings or view additional
information.
Getting Started
WARNING
Power).
Signals).
Volume) and display
Brightness).
(Adding a Vehicle
(Starting a
Route).
WARNING
into the USB port on the
until it snaps into
GPS signal status
Bluetooth
®
technology status (appears when Bluetooth is
enabled)
Vehicle profile indicator
Current time
Battery status
Connected to Smartphone Link
Temperature
Unread myGarmin

Using the On-Screen Buttons

• Select
to return to the previous menu screen.
• Hold
to quickly return to the main menu.
• Select
or
to see more choices.
• Hold
or
to scroll faster.
• Select
to see a menu of options for the current screen.
Entering and Exiting Sleep Mode
You can use sleep mode to conserve battery power when your
device is not in use. While in sleep mode, your device uses very
little power and can wake instantly for use.
TIP: You can charge your device faster by putting it in sleep
mode while charging the battery.
Press the power key
Turning Off the Device
1
Hold the power key until a prompt appears on the screen.
The prompt appears after five seconds. If you release the
power key before the prompt appears, the device enters
sleep mode.
2
Select Off.
Adjusting the Volume
1
Select Volume.
2
Select an option:
• Use the slider bar to adjust the volume.
• Select
to mute the device.
in
• Select
for additional options.
Enabling Automatic Volume
Your device can increase or decrease the volume automatically
based on the level of background noise.
1
Select Volume > .
2
Select Automatic Volume.
Adjusting the Screen Brightness
1
Select Settings > Display > Brightness.
2
Use the slider bar to adjust the brightness.
messages
.
1