Garmin GMA 350H Руководство по установке - Страница 26
Просмотреть онлайн или скачать pdf Руководство по установке для Дисплей авионики Garmin GMA 350H. Garmin GMA 350H 50 страниц. Audio panel
Также для Garmin GMA 350H: Руководство пилота (36 страниц), Руководство пилота (42 страниц)
Печатать страницу
3.8
Post Installation Checkout
The GMA 350/350H does not provide valid outputs until the aircraft post installation
configuration procedures are completed.
3.8.1 Verify Failsafe Operation with a Mono Headset
1. Remove power to the unit by pulling the audio breaker.
2. Connect a mono headset to the pilot's headset output jack and pilot's mic jack.
Use of a true mono headset is required for this test to insure proper wiring even if a stereo
jack is provided in the installation. Wiring left channel (tip contact) and right channel
(ring contact) backwards will cause failsafe mode not to function with mono headsets.
Use of a true mono headset is required for this test (not a stereo headset with a
mono/stereo switch because headset manufactures differ on how they accomplish this
switching). This will guarantee the condition of the right channel (ring terminal) being
shorted to the return (sleeve terminal) by the mono headset's plug. This short occurs
because of the physical design of the headset plug contacts and is an inevitable
consequence of plugging a mono headset into a stereo jack. During power-on operation,
this short will not damage the audio panel.
3. Verify that the COM1 transceiver can be heard in the pilot's headset.
4. Verify that COM1 can key and transmit the pilot's mic audio by verifying received sidetone
or checking reception of the transmission with another radio tuned to receive this
transmission (verify Pilot PTT and mic operation is delivered to this transceiver).
5. Apply unit power by restoring the audio breaker to the normal operating position.
3.8.2 Verify Installed Transceivers (COMs) are able to Transmit and
Receive
1. Connect a headset to the pilot's headset output and mic input jack.
2. Verify that each installed transceiver (COM) can be heard when selected.
Depending on settings, the mic selected COM may mute audio from other
COMs.
Page 3-4
Revision B
The document reference is online, please check the correspondence between the online documentation and the printed version.
NOTE
NOTE
NOTE
GMA 350/350H Installation Manual
190-01134-11