Garmin GPSMAP 400 series Дополнение к руководству пилота - Страница 17

Просмотреть онлайн или скачать pdf Дополнение к руководству пилота для Дисплей авионики Garmin GPSMAP 400 series. Garmin GPSMAP 400 series 27 страниц. Non-waas; display interfaces
Также для Garmin GPSMAP 400 series: Руководство по эксплуатации (6 страниц), Краткое справочное руководство (2 страниц), Справочное руководство (2 страниц), Руководство по установке (28 страниц), Руководство по установке (30 страниц), Руководство по шаблонам (2 страниц), Шаблон (1 страниц), Руководство по конфигурации (2 страниц), Руководство пилота (28 страниц), Краткое справочное руководство (2 страниц)

The trafﬁ c label is the altitude separation above or below the symbol and the vertical speed sense arrow

to the right of the symbol. From the Map Page, you can display trafﬁ c in a thumbnail format in any of the

top three data ﬁ elds (top four ﬁ elds on the 500 Series) on the right side of the Map Page.

To display Thumbnail Trafﬁ c on the Map Page

1. Turn the small right knob to select the Map Page.

2. Press MENU to display the Page Menu.

3. Turn the small right knob to select 'Change Fields?' and press ENT.

4. Select one of the top three ﬁ elds (top four ﬁ elds on the 500 Series). Select TRFC from the Select Field Type

List and press ENT. Note that the thumbnail range defaults to 6 nm and cannot be changed.

Highlighting Trafﬁ c Data Using Map Panning

Another map page function is panning, which allows you to move the map beyond its current limits

without adjusting the map scale. When you select the panning function—by pressing the small right knob,

a target pointer flashes on the map display. A window also appears at the top of the map display showing

the latitude/longitude position of the pointer, plus the bearing and distance to the pointer from your pres-

ent position.

To select the panning function and pan the map display:

1. Press the small right knob to activate the panning target pointer.

2. Turn the small right knob clockwise to move up, or turn it counterclockwise to move down.

3. Turn the large right knob clockwise to move right, or turn it counterclockwise to move left.

4. To cancel the panning function and return to your present position, press the small right knob.

When the target pointer is placed on trafﬁ c, the trafﬁ c range and altitude separation are displayed. The

trafﬁ c is identiﬁ ed as:

TA: Trafﬁ c Advisory, PA: Proximity Advisory, TRFC: Other Trafﬁ c

Section 3

SKYWATCH Interface

When a Trafﬁ c Advisory is active, the "Trafﬁ c"

banner is displayed in the lower right corner of the

Map Page.

When the target pointer is placed on trafﬁ c, the

trafﬁ c range and altitude separation are displayed.