Garmin GPSMAP 800 Series Руководство пользователя - Страница 8
Просмотреть онлайн или скачать pdf Руководство пользователя для Дисплей авионики Garmin GPSMAP 800 Series. Garmin GPSMAP 800 Series 46 страниц. Flat-mount kit
Также для Garmin GPSMAP 800 Series: Краткое руководство по эксплуатации (17 страниц), Дополнение к руководству пилота (22 страниц), Руководство пользователя (40 страниц), Краткое руководство по эксплуатации (4 страниц), Руководство по установке (6 страниц), Руководство по эксплуатации (32 страниц), Руководство по установке (34 страниц), Руководство по установке (6 страниц)
Печатать страницу
The device returns to normal operation after the software
update process is complete.
5
Remove the memory card.
NOTE: If the memory card is removed before the device
restarts fully, the software update is not complete.
GPS Satellite Signals
When you turn on the chartplotter, the GPS receiver must collect
satellite data and establish the current location. When the
chartplotter acquires satellite signals,
the Home screen. When the chartplotter loses satellite signals,
disappears and a flashing question mark appears over on
the chart.
For more information about GPS, go to
/aboutGPS.
Selecting the GPS Source
You can select your preferred source for GPS data, if you have
more than one GPS source.
1
Select Settings > System > GPS > Source.
2
Select the source for GPS data.
Customizing the Chartplotter
Customizing the Home Screen
You can add items to and rearrange items on the Home screen.
1
From the Home screen, select Customize Home.
2
Select an option:
• To rearrange an item, select Rearrange, select the item to
move, and select the new location.
• To add an item to the Home screen, select Add, and
select the new item.
• To remove an item you have added to the Home screen,
select Remove, and select the item.
Setting the Vessel Type
You can select your boat type to configure the chartplotter
settings and to use features customized for your boat type.
1
Select Settings > My Vessel > Vessel Type.
2
Select Powerboat or Sailboat.
Adjusting the Backlight
1
Select Settings > System > Display > Backlight.
TIP: Press
from any screen to open the backlight settings.
2
Select an option:
• Adjust the backlight level.
• Select Auto.
Adjusting the Color Mode
1
Select Settings > System > Display > Color Mode.
TIP: Press
from any screen to access the color settings.
2
Select an option.
Enabling AIS Transmission Test Alerts
To avoid a large number of test alerts and symbols in crowded
areas such as marinas, you can select to receive or ignore AIS
test messages. To test an AIS emergency device, you must
enable the chartplotter to receive test alerts.
1
Select Settings > Alarms > AIS.
2
Select an option:
• To receive or ignore Emergency Position Indicating Radio
Beacon (EPRIB) test signals, select AIS-EPIRB Test.
2
appears at the top of
www.garmin.com
• To receive or ignore Man Overboard (MOB) test signals,
select AIS-MOB Test.
• To receive or ignore Search and Rescue Transponder
(SART) test signals, select AIS-SART Test.
Communication with Wireless Devices
The chartplotters can create a wireless network to which you
can connect wireless devices.
Some models also can connect to Bluetooth
using the AVRCP profile.
Connecting wireless devices allows you to use Garmin apps,
including BlueChart
®
Mobile and Garmin Helm
www.garmin.com
for more information.
Setting Up the Wi‑Fi
The chartplotters can create a Wi‑Fi network to which you can
connect wireless devices. The first time you access the wireless
network settings, you are prompted to set up the network.
1
Select Settings > Communications > Wireless Devices >
Wi-Fi® Network > Wi-Fi® > On > OK.
2
If necessary, enter a name for this wireless network.
3
Enter a password.
You will need this password to access the wireless network
from a wireless device. The password is case-sensitive.
Connecting a Wireless Device to the
Chartplotter
Before you can connect a wireless device to the chartplotter
wireless network, you must configure the chartplotter wireless
network
(Setting Up the Wi‑Fi
You can connect multiple wireless devices to the chartplotter to
share data.
1
From the wireless device, turn on the Wi‑Fi technology and
search for wireless networks.
2
Select the name of your chartplotter wireless network
Up the Wi‑Fi
Wireless
Network).
®
3
Enter the network password.
Changing the Wireless Channel
You can change the wireless channel if you have trouble finding
or connecting to a device, or if you experience interference.
1
Select Settings > Communications > Wireless Devices >
Wi-Fi® Network > Advanced > Wi-Fi® Channel.
2
Enter a new channel.
You do not need to change the wireless channel of devices
connected to this network.
Using the Garmin Helm App with the
Chartplotter
Before you can control the chartplotter with the Garmin Helm
app, you must download and install the application, and connect
the chartplotter to a mobile device
Device to the
Chartplotter).
1
Select Settings > Communications > Wireless Devices >
Helm App.
2
Select an option.
3
Use the application to view or control the chartplotter.
Connecting a Bluetooth Wireless Device
NOTE: Bluetooth technology is not available on all chartplotter
models.
®
wireless devices
™
. See
Wireless Network
®
Wireless
Network).
®
(Connecting a Wireless
Customizing the Chartplotter
(Setting