Garmin GHP 10 Руководство по установке - Страница 3

Просмотреть онлайн или скачать pdf Руководство по установке для Морская система GPS Garmin GHP 10. Garmin GHP 10 48 страниц. Autopilot system, addendum
Также для Garmin GHP 10: Руководство по установке (26 страниц), Руководство пользователя (28 страниц), Декларация о соответствии (1 страниц), Ссылка (1 страниц), Примечания к конфигурации (14 страниц)

the Shadow Drive

the GHC 10

Cables and Connectors

The GHP 10 autopilot system contains multiple cables. These cables connect the components to power, to each other, to an alarm, and

to optional devices such as a NMEA 0183-compatible GPS device.

CCu/ECu Interconnect Cable

This cable connects the CCU to the ECU. A portion of this cable contains color-coded wires with bare ends. These wires connect the

CCU to the tachometer of your boat, to the Shadow Drive, and to the alarm. (Garmin part number: 010-11055-00)

the Alarm

The alarm is wired to the CCU and provides audible alerts from the GHP 10. See

ECu Power Cable

This cable powers the ECU. Wire this to the battery of your boat as one of the last connections made in the GHP 10 installation.

See

page

33. (Garmin part number: 010-11057-00)

GHC 10 nMEA 0183 Data Cable

This cable is included in the GHC 10 box. This cable is used to connect to an optional NMEA 0183-compatible GPS device and to the

Accessory Turn On of the GHP 10. See

GHP 10 Marine Autopilot System Installation Instructions

The Shadow Drive is a sensor you install in the hydraulic steering lines of your boat. While the GHP 10

is engaged, the Shadow Drive temporarily disengages the autopilot when you manually take control of

the helm. When you establish a new straight line heading, the Shadow Drive automatically reengages the

autopilot.

Garmin part number: 010-11054-00

Serial number

Use the GHC 10 to operate the GHP 10 autopilot system. Using the GHC 10, you engage and steer the

GHP 10. You also set up and customize the GHP 10 using the GHC 10. The GHC 10 connects to a NMEA

2000 network to communicate with the CCU and with an optional NMEA 2000-compatible GPS device

(to use waypoint and route information). If a NMEA 2000-compatible GPS device is not available, you

can wire the GHC 10 to an optional NMEA 0183-compatible GPS device instead.

Garmin part number: 010-00688-00

Serial number

page

29. (Garmin part number: 320-00023-07)

page

27. (Garmin part number: 010-11056-00)