Garmin GPSMAP 400 series Дополнение к руководству пилота - Страница 23

Просмотреть онлайн или скачать pdf Дополнение к руководству пилота для Морская система GPS Garmin GPSMAP 400 series. Garmin GPSMAP 400 series 27 страниц. Non-waas; display interfaces
Также для Garmin GPSMAP 400 series: Руководство по эксплуатации (6 страниц), Краткое справочное руководство (2 страниц), Справочное руководство (2 страниц), Руководство по установке (28 страниц), Руководство по установке (30 страниц), Руководство по шаблонам (2 страниц), Шаблон (1 страниц), Руководство по конфигурации (2 страниц), Руководство пилота (28 страниц), Краткое справочное руководство (2 страниц)

Печатать страницу
Garmin GPSMAP 400 series Дополнение к руководству пилота

TCAD Setup Page

The Ryan TCAD Setup Page is accessed from the Traffic Page. The TCAD Setup Page allows you to
configure traffic data. The definitions of the available options are listed in the TCAD Pilot' s Handbook.
To change a TCAD setup option:
1. Turn the small right knob to select the Traffic Page. Press MENU to display the Page Menu. Turn the small
right knob to select 'Setup?' and press ENT.
2. The flashing cursor highlights the Mode field. Turn the small right knob to select the mode and press ENT.
The mode selection determines which shield definition to display and change. Turn the large right knob to
select the desired remaining options fields. Turn the small right knob to select the desired option and press
ENT.
3. Return to the Traffic Page by pressing CLR.
Traffi c Page Fields
There are two selectable fields on the Traffic Page: the Operating Mode Field and the Barometric
Pressure Field. The Operating Mode Field selects the TCAD operating mode. Please, refer to the TCAD
Pilot' s Handbook for a complete description of all modes of operation. For the 9900BX model, this field is
replaced with the SKYWATCH style altitude mode.
To select the Operating Mode:
1. From the Traffic Page, press CRSR to highlight the operating mode field. Turn the small right knob to select
the desired operating mode and press ENT.
The traffi c display range is automatically set to the shield size and cannot be changed
(9900B only).
Section 4
Ryan TCAD Interface
Ryan TCAD Setup Page (9900B only)
21