alkitronic EAF Руководство по эксплуатации и техническому обслуживанию - Страница 11
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и техническому обслуживанию для Водяной насос alkitronic EAF. alkitronic EAF 16 страниц. Battery powered torque multiplier
Печатать страницу
9.2
Causes and problem solving
Battery pack almost empty
The electronic system protects the battery pack against
complete discharging.
If the LED display (L, Fig.4) flashes the battery pack is almost
empty. If necessary, press the button on the battery pack (8,
Fig. 4) to check the charge state, and iff the battery pack is
almost empty it must be recharged.
See also pos. 4.1.2 Battery pack, displays
Excessive temperature
Overheating of the power tool over an extended period of
time will result in the temperature switch-off. The tool or
the battery pack must be cooled down.
If the battery pack is very warm to the touch it is
recommended to cool it in the charger station. The
motor will cool down quicker in the idle mode.
Excessive current increase
The power tool was switched off automatically.
If the current increase is quick (such as when, e.g. there is a
sudden blockage or seizing) the tool is switched off. Switch
off the power tool on the push button (D, Fig.3). Then restart
and continue working normally. Prevent further blockages.
10. Noise level and vibration
Permanent noise level measured at maximum idle speed:
Model alkitronic® EAF : 76 dB(A)
Measurement of noise emissions at various working cycles.
Distance of the sound sensor 1 m from the geometric centre
of the power tool.
Vibration: medium until just before reaching the preselected
torque.
11. Environmental protection
Do not immerse battery packs in water.
Protect the environment and do not dispose of
electrical power tools and battery packs in nor-
mal household waste. Observe national regula-
tions regarding recycling separation of unusable
machinery, accessories and packaging. Secure the
contacts against shorts (e.g. cover with PTFE).
battery powered torque multiplier
12.
On our own responsibility we hereby declare alki Technik
GmbH that the alkitronic® battery driven torque multipliers
identified by Type EAF and Serial Number (e.g. YOM* 2021:
129.... or YOM* 2022: 229....) meet all relevant requirements
of directives:
2021-01
Techn. documents at alki Technik GmbH, Unterlettenweg 4,
85051 Ingolstadt / Germany.
*) YOM Year of Manufacture
13. Annex
11
EEC Declaration of Conformity
according to the EEC Machinery Directive
2006/42/EG Annex II A
2006/42/EG, 2011/65/EU, 2004/108/EG (EMC Guide-
line), DIN EN 62841-2-2:2015-05, Part 2-2: Particular
requirements for hand-held screwdrivers and im-
pact wrenches (IEC 62841-2-2:2014, modified)
- Technical Data, Pages 12-13
- Notes, Pages 14-15
- Calibration certificate with machine-specific
torque values (attachment)
Alexander Kipfelsberger
Managing Director