Garmin GPSMAP 500 Series Руководство пилота - Страница 12

Просмотреть онлайн или скачать pdf Руководство пилота для Морская система GPS Garmin GPSMAP 500 Series. Garmin GPSMAP 500 Series 28 страниц. Flat-mount kit
Также для Garmin GPSMAP 500 Series: Руководство по эксплуатации (6 страниц), Дополнение к руководству пилота (27 страниц), Краткое справочное руководство (2 страниц), Справочное руководство (2 страниц), Руководство по эксплуатации (28 страниц), Шаблон (2 страниц), Шаблон (1 страниц), Руководство по конфигурации (2 страниц), Краткое руководство по эксплуатации (4 страниц), Руководство пользователя (38 страниц), Руководство пользователя (44 страниц), Руководство по установке (34 страниц), Краткое справочное руководство (2 страниц)

Печатать страницу
Garmin GPSMAP 500 Series Руководство пилота
SECTION 2
STORMSCOPE INTERFACE

Panning the Map Page

Panning moves the map beyond its current limits
without adjusting the map scale. In panning mode a
target pointer flashes on the map display, and a window
appears at the top of the map display showing the latitude/
longitude position of the pointer. The window also shows
bearing and distance to the pointer from the aircraft' s
present position.
Panning with the cursor on the Map Page allows the
pilot to zoom in and isolate individual cells. Strike data is
not typically updated on the Map Page while the panning
cursor is on, therefore, when the panned map is first
displayed, the data is only a "snapshot" of conditions.
Selecting the panning function and panning
the map display:
Press the small right knob to activate the
1)
panning target pointer (Figure 2-6).
2)
Turn the small right knob clockwise to move
up, or counterclockwise to move down.
Turn the large right knob clockwise to move
3)
right, or counterclockwise to move left.
Figure 2-6 Panning on Map Page
4)
To cancel the panning function and return to
the present position, press the small right
knob.
2-4

WEATHER PAGE

Weather Page—400 Series
In addition to the Map Page, storm data can also be
viewed on the Weather Page. In the 400 Series, when
the STORMSCOPE is connected to the unit, the Weather
Page appears after the Traffic Page in the sequence of NAV
Pages, resulting in a total of nine pages (Figure 2-7).
Default NAV
Weather
(if configured)
Position
400/500 Series Display Interfaces
Map
TERRAIN
(if configured)
Satellite Status
Figure 2-7 400 Series NAV Pages
190-00140-10 Rev. E
TRAFFIC
(if configured)
NAV/COM
VNAV