Garmin GPSMAP 5008 - Marine GPS Receiver Руководство по установке - Страница 2

Просмотреть онлайн или скачать pdf Руководство по установке для Морская система GPS Garmin GPSMAP 5008 - Marine GPS Receiver. Garmin GPSMAP 5008 - Marine GPS Receiver 19 страниц. Weather and xm satellite radio gpsmap 4000 series; gpsmap 5000 series; gpsmap 6000 series; gpsmap 7000 series
Также для Garmin GPSMAP 5008 - Marine GPS Receiver: Краткое справочное руководство (2 страниц), Руководство пользователя (2 страниц), Руководство пользователя (2 страниц), Технический справочник (30 страниц), Руководство по установке (25 страниц), Краткое справочное руководство (2 страниц), Руководство по установке (25 страниц), Важная информация по безопасности (48 страниц), Декларация о соответствии (1 страниц), Руководство по печати (2 страниц), Дополнительное руководство (24 страниц)

Печатать страницу

Garmin GPSMAP 5008 - Marine GPS Receiver Руководство по установке

1. Wiring and Cables

To install the bail mount and unit:

1. Using the bail mount as a template, mark the location of the four mounting holes. Be sure to leave at least 5" (12.7 cm) of clearance

behind the unit for the wiring.

NoTE: Mount a 4008/4208/5008/5208 unit 31

2. Using an appropriately sized drill bit, drill the pilot holes for your mounting hardware.

3. Secure the bail mount to the surface with your mounting hardware.

4. Loosely attach the mounting knobs to the GPSMAP 4000/5000 series unit.

5. Slide the unit onto the bail mount, and tighten the mounting knobs.

Flush Mounting the GPSMAP 4000/5000 Series Unit

Hardware (included):

• Flush mount template

• Four threaded 4 mm mounting studs

• Four 4 mm flat washers

• Four 4 mm lock washers

• Four 4 mm nuts

Tools required (not included):

• Jig saw

• Masking tape

• Scissors

• Drill

• Drill bits—

" (6 mm) and 4 mm

•

" (2 mm) Allen (Hex) wrench

• 4 mm sockets or wrenches

• Center punch and hammer

" (80 cm), and a 4012/4212/5012/5212 unit 39

GPSMAP

Pilot Hole

3/8" (9.5 mm)

6 17/32"

(165.90 mm)

Flush Mount Template Example (not to scale)

July 2007

190-00779-03_0B.indd 1

" from a magnetic compass to avoid interference.

4000 SerieS FluSh Mount teMPlAteS

GPSMAP 4008/4208

unit dimensions: 11 3/16" (284.4 mm) wide x 6 31/32" (176.9mm) high

Cut on

thiS line

9 5/8" (244.50 mm)

190-00779-03 Rev. B

GPSMAP 4000/5000 Series Installation Instructions

USE 4 mm DRILL BIT

Recommended clearance

for SD card door

1/2"

13 mm

Printed in Taiwan

7/9/2007 10:08:51 AM