Garmin GPSMAP 5012 - Marine GPS Receiver Руководство по установке - Страница 11

Просмотреть онлайн или скачать pdf Руководство по установке для Морская система GPS Garmin GPSMAP 5012 - Marine GPS Receiver. Garmin GPSMAP 5012 - Marine GPS Receiver 25 страниц. Weather and xm satellite radio gpsmap 4000 series; gpsmap 5000 series; gpsmap 6000 series; gpsmap 7000 series
Также для Garmin GPSMAP 5012 - Marine GPS Receiver: Краткое справочное руководство (2 страниц), Руководство пользователя (2 страниц), Руководство пользователя (2 страниц), Технический справочник (30 страниц), Руководство по установке (19 страниц), Руководство по установке (25 страниц), Краткое справочное руководство (2 страниц), Важная информация по безопасности (48 страниц), Декларация о соответствии (1 страниц), Руководство по печати (2 страниц), Дополнительное руководство (24 страниц)

Печатать страницу
Garmin GPSMAP 5012 - Marine GPS Receiver Руководство по установке

Creating a Basic nMEA 2000 network

If your boat does not already have an existing NMEA 2000 network installed, you will need to create a basic NMEA 2000 network. For more
information on NMEA 2000, visit www.garmin.com.
to create a basic nMEA 2000 network
1. Connect the three included T-connectors together by their sides.
2. Connect the appropriate terminators to each end of the combined T-connectors.
3. Wire the included NMEA 2000 power cable to a 12 Vdc power source through a switch. Connect to the ignition switch for the boat if possible.
4. Connect the NMEA 2000 power cable to the top of one of the T-connectors.
5. Route and connect the included NMEA 2000 drop cables from the GPS 17x and from the GPSMAP 4000/5000 series chartplotter to the tops
of the other T-connectors.
NOTES:
• The diagram shows only the NMEA 2000 data connection to the GPSMAP 4000/5000 series chartplotter. The chartplotter must also be
connected to power or it will not function. See
• One GPS antenna will provide position data for every device on the NMEA 2000 network. Do not connect multiple GPS antennas if you are
using multiple chartplotters.
GPSMAP 4000/5000 Series Installation Instructions
GPSMAP 4000/5000
series chartplotter
Ignition or
in-line switch
Power cable
Fuse
-
+
12 Vdc battery
Female
terminator
Creating a Basic nMEA 2000 network
page
9.
GPS 17x
antenna
Drop cables
terminator
T-connectors
Male
11