Garmin GPSMAP 620 Краткое справочное руководство - Страница 2
Просмотреть онлайн или скачать pdf Краткое справочное руководство для Морская система GPS Garmin GPSMAP 620. Garmin GPSMAP 620 2 страницы. Garmin gps receiver user manual
Также для Garmin GPSMAP 620: Инструкция по технике безопасности (2 страниц), Инструкции по установке (2 страниц), Декларация о соответствии (6 страниц), (Краткое справочное руководство (2 страниц), (Итальянский) Краткое справочное руководство (2 страниц)
Печатать страницу
Mount Your GPSMAP 620/640
1. Flip up the locking tab on top of the mounting bracket.
2. Fit the bottom of the device into the cradle.
3. Tilt the device back until it stops.
4. Flip down the locking tab to hold the device in the mounting
bracket.
To remove the GPSMAP 620/640 from the mounting
bracket:
1. Flip up the locking tab on top of the mounting bracket.
2. Tilt the device forward, and lift it out of the mounting bracket.
Powering the GPSMAP 620/640 On and Off
Power on the GPSMAP 620/640:
• If the mounting bracket on your boat or in your car is connected to power, the device powers
on when you place it in the mount.
• To power on the device manually, press and hold the
Power
appears on the screen.
Power off the GPSMAP 620/640:
• When you remove the device from the mounting bracket, you will be prompted to continue on
battery power. Touch
Turn Off
to power off the device.
• To power off the device manually, press and hold the
Power
Note: If you manually power off the device while it is connected to a power source, it will continue
to charge the battery
Inserting a Secure �igital (S�) Card
1. Turn the locking ring and remove the battery pack. The SD card slot
is in the bottom of the battery compartment, on the opposite side
from the battery contacts.
2. Place an SD card into the opening with the label showing and with
the SD card contacts facing away from the battery contacts.
3. Slide the SD card into the SD card slot, and press until it clicks and
locks in place.
4. Insert the battery pack.
To remove an S� card:
1. Remove the battery.
2. Press in on the SD card until it clicks and releases from the SD card
slot.
3. Remove the SD card.
Marine Mode: Acquiring Satellites
1. Go outdoors to an open area, away from tall buildings and trees.
2. Turn on your GPSMAP 620/640.
Acquiring satellite signals can take a few minutes. The
When at least one of the bars is green, your GPSMAP 620/640 has acquired satellite signals.
Now you can select a destination and navigate to it.
Marine Mode: Understanding Your GPSMAP 620/640
Placing the
Placing the
Usage mode. A boat icon represents
GPSMAP 620/640 in the
GPSMAP 620/640 in the
➊
marine mode, and a car icon represents
Mounting Bracket
Mounting Bracket
automotive mode. Touch this icon to
change modes.
XM
satellite strength (only available
®
➋
on the GPSMAP 640 when using an
optional GXM 40 XM antenna).
key until the Garmin logo
GPS satellite strength.
➌
Battery status.
➍
Current time.
➎
Home screen categories and actions. Touch an icon to view the associated menu or
➏
perform the associated action.
key until the unit powers off.
Marine Mode: Navigating �irectly to a �estination
1. From the Home screen, touch
2. On the Navigation chart, touch the place you would like to navigate to.
Note: Touch
the map.
3. When the
pointer icon is on the location you want to navigate to, touch
Go
To.
4. Follow the magenta line drawn between your current location and your destination.
Navigate with caution; avoid land masses and obstacles while following the line to your
destination.
Direction to
destination
Position and
heading
Inserting an S� Card
Inserting an S� Card
bars indicate satellite strength.
➊
➊
➋ ➌➍ ➎
➋ ➌➍ ➎
➏
➏
Marine Mode: Home screen
Marine Mode: Home screen
Charts
>
Navigation
Chart.
and
to zoom in and out. Touch anywhere on the chart and drag it to pan
Navigate To
Navigation
information
Navigating �irectly to a �estination
Marine Mode: Saving Your Current Location
To save a location, such as your marina or a good fishing spot, mark it as a waypoint.
1. From the Home screen, touch Mark.
2. If you want to name the waypoint, touch
Edit Waypoint
to enter a name other than the number assigned to the waypoint by default.
Marine Mode: Navigating �irectly to a Saved Location
1. From the Home screen, touch
Where To?
> Waypoints.
2. Touch the waypoint you want to navigate to.
3. Touch
Navigate To
>
Go
To.
4. Follow the magenta-highlighted line drawn between your current location and your destination.
Navigate with caution; avoid land masses and obstacles while following the line to your
destination.
Marine Mode: Using Man Overboard (MOB) Waypoints
Use a Man Overboard (MOB) waypoint to both create a waypoint with an international MOB
symbol ( ) and immediately begin navigating to the MOB waypoint with a direct course.
To mark an MOB waypoint:
1. Touch
Mark
in the top-left corner of any screen except the Home screen. This immediately
marks your current position as a waypoint.
2. Touch
Man
Overboard. This designates the waypoint as an MOB waypoint and begins
navigation automatically.
Note:
You can also touch Man overboard
on the Home screen to mark a MOB waypoint and
immediately begin navigation.
Marine Mode: Stopping Navigation
1. While navigating, from the Navigation chart, touch Menu.
>
2. Touch
Stop
Navigation.
Note: You can also stop navigation from the Where To? screen.
Marine Mode: Adjusting the Backlight
1. From any screen, press and quickly release the
2. Touch and drag the backlight slider bar to the left to decrease the brightness, and drag it to
the right to increase the brightness. The box to the right of the backlight slider bar shows the
backlight level as a percentage.
S ee the Important Safety and Product Information guide in the product box for product warnings and other
important information.
Please visit www.garmin.com for additional documentation and information.
November 2008
Part Number 190-01006-01 Rev. A
> Name. Use the on-screen keyboard
Power
key.
Printed in Taiwan