To obtain the best possible performance, install your GFS 10 Fuel Sensor according to the following instructions. If you experience difficulty
during the installation, contact Garmin Product Support, or seek the advice of a professional installer.
The GFS 10 will communicate with NMEA 2000- or Garmin CANet-compatible chartplotters and displays. Refer to
of compatible devices.
Warnings:
• The GFS 10 is designed for use with gasoline-engine fuel systems. Do not use the gFs 10 with diesel-engine fuel systems. Do not use
the gFs 10 with fuel that contains more than 10% ethanol such as E85 fuel.
• The GFS 10 is designed for use with single-line fuel systems. Do not install the GFS 10 on engines with a return line to the fuel tank. On
pressurized fuel injected systems, the GFS 10 must be mounted on the low pressure side of the high-pressure fuel pump. Engine-mounted
fuel reservoirs may cause erratic flow readings. The GFS 10 is not recommended for systems with large engine-mounted fuel reservoirs.
• Gasoline is extremely flammable. If possible, drain the fuel hose before you start, or shut any flow valves located near the tank. Keep
sparks and flame away from the work area.
• Work in a well-ventilated area.
• After installation, be sure to clean up any spilled fuel, and dispose of any spilled fuel in accordance with local laws.
• Periodically check the GFS 10 installation for leaks, and repair any leaks before using your boat.
• See the Important Safety and Product Information guide in the product box for additional product warnings and other important
information.
Product Registration
Help us better support you by completing our online registration at www.garmin.com/registration/. For future reference, write the serial number
assigned to your GFS 10 in the space provided. It is located on a sticker on the back of the unit and on a sticker around the cable.
Serial number
Contact Garmin
Contact Garmin if you have any questions while using your GFS 10. In the USA contact Garmin Product Support by phone: (913) 397-8200 or
(800) 800-1020, or go to www.garmin.com/support/. In Europe, contact Garmin (Europe) Ltd. at +44 (0) 870.8501241 (outside the UK) or 0808
2380000 (within the UK).
Packing List and Accessories
Before installing your unit, confirm that your package includes the following items. If any parts are missing, contact your Garmin dealer
immediately.
Standard Package
• GFS 10 Fuel Sensor unit
• 4 reusable stainless-steel hose clamps
•
/
in. fuel filter (in-line)
3
8
• Mounting hardware
• CANet adapter
• NMEA 2000 T-connector
• Installation instructions
• Software update SD card
GFS 10 Fuel Sensor Installation Instructions
GFS 10
Fuel Sensor Installation Instructions
™
Optional Accessories
• Additional NMEA 2000 network components
• CANet kit
• Replacement fuel filter
◦ Garmin recommends replacing the fuel filter at the start of each
season or every 2,600 gal (10,000 L).
◦
3
/
in. hose compatible, 30-micron rated, E10 compatible
8
◦ Metal housing required for inboard applications
◦ West Marine part number 18-7857-1 or equivalent
Tools Needed
• Hose cutter or knife (to cut the fuel hose)
• Flathead and Phillips screwdrivers (to tighten the hose clamps and
secure the unit)
• Drill and drill bits (to install the mounting hardware)
www.garmin.com
for a list
1
Печатать страницу