Garmin GPSMAP 421/421s Руководство по установке - Страница 2

Просмотреть онлайн или скачать pdf Руководство по установке для Морское оборудование Garmin GPSMAP 421/421s. Garmin GPSMAP 421/421s 28 страниц. Marine navigation equipment
Также для Garmin GPSMAP 421/421s: Руководство по установке (12 страниц), Справочное руководство (2 страниц), Технический справочник (42 страниц), Важная информация по безопасности (48 страниц), Руководство по шаблонам (2 страниц), Декларация о соответствии (1 страниц)

3. Install the unit in the opening (see Figure 2):

•

Place the unit housing in the recently cut hole in the mounting surface.

•

Slide the tension mount arms onto the hex bolts and secure them with the (4) wing nuts.

•

Tighten the (4) wing nuts to secure the unit housing to the mounting surface. Be careful not to overtighten.

Assembled unit and

flush mount hardware

NOTE: If you are installing a Fishfinder 400C, the wiring harness must be connected to the boat's power supply and transducer per the installation

instructions included with the unit.

NOTE: If you are installing a GPSMAP 400 series unit, you must connect the wiring harness to the boat's power supply, GPS antenna, XM antenna

(if applicable), and transducer (if applicable) per the installation instructions included with the unit.

Tension mount brackets

Figure 2

Wing nuts