Garmin GTX 320 Руководство пилота - Страница 2

Просмотреть онлайн или скачать pdf Руководство пилота для Морское радио Garmin GTX 320. Garmin GTX 320 4 страницы. Garmin gtx 320/320a transponder installation manual
Также для Garmin GTX 320: Руководство по техническому обслуживанию (24 страниц), Руководство по установке (37 страниц), Руководство по установке (43 страниц)

Operating The GTX 320

CODE SELECTION KNOBS

The GTX 320 owner accepts all responsibility for obtaining the proper license before

using the transponder.

The coverage you can expect from the GTX 320 is limited to "line of sight". Low altitude

or aircraft antenna shielding by the aircraft itself may result in reduced range. Range can

be improved by climbing to a higher altitude. It may be possible to minimize antenna

shielding by locating the antenna where dead spots are only noticed during abnormal

flight attitudes.

Function Selector Switch

The function selector switch is a five position rotary switch. The five positions are:

• OFF—Turns off all power to the GTX 320 (the GTX 320 should be turned off before starting

aircraft engine(s).

• SBY—Turns the transponder on, but when in SBY the GTX 320 will not reply to any interro-

gations from the ground radar system.

• ON—Places the transponder in Mode A, the identification mode. In addition to the aircraft' s

identification code, the GTX 320 will also reply to altitude interrogations (Mode C) with sig-

nals that do not contain altitude information.

• ALT—Activates all of the necessary circuitry (transponder to optional altitude digitizer and

return) to respond to ATC altitude interrogations and aircraft identification interrogations with

standard pressure altitude (29.92 inches Hg). The ALT position may be used in aircraft that

are not equipped with the optional altitude digitizer, however, the only response will be dis-

creet signals that do not contain altitude information.

• TST—Turning the switch to the TST position tests the reply indicator. The TST position is

spring loaded and must be held momentarily. When released, it will automatically return to

the ALT position.

IDENT BUTTON

FUNCTION SELECTION KNOB

NOTES

REPLY LIGHT