Garmin GTX 327 Руководство пилота - Страница 5

Просмотреть онлайн или скачать pdf Руководство пилота для Морское радио Garmin GTX 327. Garmin GTX 327 8 страниц. Mode a/c transponder
Также для Garmin GTX 327: Руководство пилота (8 страниц), Руководство пилота (8 страниц), Руководство пилота (8 страниц), Руководство пилота (4 страниц)

Печатать страницу
Garmin GTX 327 Руководство пилота

Important Codes:

1200
The VFR code for any altitude in the US (Refer to ICAO standards elsewhere)
7000
The VFR code commonly used in Europe (Refer to ICAO standards)
7500
Hijack code (Aircraft is subject to unlawful interference)
7600
Loss of communications
7700
Emergency
7777
Military interceptor operations (Never squawk this code)
0000
Military use (Not enterable)
Avoid selecting code 7500 and all codes in the 7600-7777 range. These codes trigger
special indicators in automated facilities. An aircraft' s transponder code is used for ATC
tracking purposes, therefore exercise care when making routine code changes.
Keys for Other GTX 327 Functions
IDENT
Pressing the IDENT key activates the Special Position Identifi ca-
tion (SPI) Pulse for 18 seconds, identifying your transponder return from
others on the air traffi c controller' s screen. The word 'IDENT' will appear in
the upper left corner of the display while the IDENT mode is active.
VFR
Sets the transponder code to the pre-programmed VFR code selected
in Confi guration Mode (this is set to 1200 at the factory). Pressing the VFR
key again restores the previous identifi cation code.
FUNC
Changes the page shown on the right side of the display. Display
includes Pressure Altitude, Flight Time, Count Up and Count Down timers.
In Confi guration Mode, steps through the confi guration pages.
START/STOP
Starts and stops the Count Up, Count Down and Flight
timers. In Confi guration Mode, steps through confi guration pages in reverse.
CRSR
Initiates starting time entry for the Count Down timer and cancels
transponder code entry. Selects changeable fi elds in Confi guration Mode.
CLR
Resets the Count Up, Count Down and Flight timers. Cancels the
previous keypress during code selection and Count Down entry. Returns
cursor to the fourth code digit within fi ve seconds after entry. Used in
Confi guration Mode.
8
Reduces Contrast and Display Brightness when the respective fi elds are
displayed and enters the number eight into the Count Down timer. Used
in Confi guration Mode.
9
Increases Contrast and Display Brightness when the respective fi elds are
displayed and enters the number nine into the Count Down timer. Used in
Confi guration Mode.