Brother 4020C - DCP Color Inkjet Руководство по быстрой настройке - Страница 6

Просмотреть онлайн или скачать pdf Руководство по быстрой настройке для Принтер "все в одном Brother 4020C - DCP Color Inkjet. Brother 4020C - DCP Color Inkjet 25 страниц. Brother all in one printer user manual

Печатать страницу
Step 1
Installing the Ink
6
Cartridges
1
Make sure that the power is turned on.
The LCD shows:
CHECK CARTRIDGE
Open cover, then...
2
Pull the scanner cover release lever to open
the scanner cover and lift it to the opening
position.
Scanner Cover
3
Lift the output paper support and ink
cartridge cover.
Output Paper
Support
4
Remove the yellow plastic protective
cartridges.
Protective Cartridge
Do not throw away the yellow plastic
protective cartridges. You will need them in
the future to transport the machine.
4
Setting Up the DCP
Scanner Cover
Release Lever
Ink Cartridge Cover
5
Insert the ink cartridges into the slot for each
colour until it clicks.
Do not peel a film off the cartridge.
Ink Cartridge
6
Close the ink cartridge cover, the output
paper support and the scanner cover. When
the DCP is setup for the first time, the
machine will prepare the Brother unique ink
tube system for use for the first time. This
process will occur only once, the first time
ink cartridges are installed. The preparation
process will last up to four minutes.
Output Paper
Support
Ink Cartridge
Cover
The LCD shows:
PREPARING SYSTEM
APPROX 4 MINUTES
PREPARING SYSTEM
PLEASE WAIT
• DO NOT remove ink cartridges if
you do not need to replace them.
If you do so, it may reduce the ink
quantity and the DCP will not
know the quantity of ink left in
the cartridge.
Scanner
Cover