AEG OKO FAVORIT 40660 i Инструкции пользователя - Страница 35

Просмотреть онлайн или скачать pdf Инструкции пользователя для Посудомоечная машина AEG OKO FAVORIT 40660 i. AEG OKO FAVORIT 40660 i 44 страницы. Aeg dishwasher
Также для AEG OKO FAVORIT 40660 i: Информация о пользователе (44 страниц), Инструкции пользователя (40 страниц), Инструкции пользователя (44 страниц), Инструкции пользователя (48 страниц)

The following section is only applicable to dishwashers that have a

safety valve on the threaded hose fitting for the tap:

Water inlet hose with safety valve

After connecting the double-walled water inlet hose, the safety valve is

next to the tap. Therefore the water inlet hose is only under pressure

while the water is running. If the water inlet hose starts to leak during

this operation, the safety valve cuts off the running water and the

draining pump in the dishwasher is switched on.

Please take care when installing the water inlet hose:

– The distance between the bottom

edge of the safety value and the

floor on which the dishwasher is

standing must be at least 30 cm:

– The electrical cable for the safety

valve is in the double-walled water

inlet hose. Do not immerse the

water inlet hose or the safety valve

in water.

– If the water inlet hose or the safety

valve is damaged, remove the

mains plug immediately.

– A water inlet hose with safety valve

must only be replaced by your local

Service Force Centre.

– Place the water inlet hose in such a way that it is never higher than

the bottom edge of the safety valve.

Installation and Connection Instructions