AEG OKO_FAVORIT 4020 Руководство по эксплуатации - Страница 39
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Посудомоечная машина AEG OKO_FAVORIT 4020. AEG OKO_FAVORIT 4020 44 страницы. Aeg dishwasher
Также для AEG OKO_FAVORIT 4020: Руководство по эксплуатации (45 страниц)
Печатать страницу
Water protection system
To protect your dishwasher from water damage, it is equipped with a water pro-
tection system.
Apart from an overflow protection, which prevents uncontrolled rising of water in
the appliance, it also features an outlet protection. This responds in the event of
any untightness in the machine.
In all cases of leakage, the drain pump is switched on. This prevents water from
either flowing out or overflowing. Any residual water in the appliance is auto-
matically pumped away.
The pump also operates even if the machine is switched off and should not be
disconnected from the electricity supply.
A fault is recognised by the fact that a pump noise can be heard when the machine
is switched off.
If a fault occurs, first turn off the water tap. Then pull the plug out of the plug
socket. If there is a fixed connection, switch off or unscrew the fuse(s).
Electrical connection
According to the technical connection conditions of the electricity companies, a
fixed connection to the mains supply may only be made by an approved electri-
cal installer.
Comply with the VDE specifications when connecting the machine and also where
necessary with the additional regulations of the local electricity companies. After
installation, live parts and insulated lines should not be accessible with the test
finger to EN 60335/DIN VDE 0700.
Details of the electrical connection are given on the rating plate. This is located
on the RH inside edge of the door. If the machine is convertible, the changeover
diagram directions given on the mains junction box must also be observed.
During appliance connection, it is essential to ensure that the nominal voltage and
current type specified on the rating plate are the same as the mains voltage and
current type at the installation site. The necessary electrical fusing is also indi-
cated on the rating plate.
To disconnect the dishwasher from the mains supply, pull out the plug. Should
the appliance have a fixed wiring connection with the mains supply, it must be
disconnected by appropriate measures on the fixed wiring side (fuses, auto-
matic cutout, spurious current protection switch, or the like which have a
contact opening width > 3 mm).
39