Brother MFC-J6510DW Руководство по быстрой настройке - Страница 29
Просмотреть онлайн или скачать pdf Руководство по быстрой настройке для Принтер "все в одном Brother MFC-J6510DW. Brother MFC-J6510DW 41 страница. Quick setup guide - spanish
Также для Brother MFC-J6510DW: Технические характеристики (2 страниц), Руководство по быстрой настройке (39 страниц), Руководство по эксплуатации (17 страниц), (Английский) Руководство по быстрой настройке (41 страниц)
Печатать страницу
For Wireless Network Users
Configure the wireless
20
settings using the
automatic wireless (one-
push) method
a
Confirm your wireless access point/router has
the WPS (Wi-Fi Protected Setup) or AOSS™
symbol as shown below.
b
Place the Brother machine within range of your
WPS or AOSS™ access point/router. The
range may differ depending on your
environment. Refer to the instructions provided
with your access point/router.
c
On your machine, press Menu.
Press a or b to choose Network and press
OK.
Press a or b to choose WLAN and press OK.
Press a or b to choose WPS/AOSS and press
OK.
When Network I/F switched to
Wireless. is displayed, press OK to accept.
This will start the wireless setup wizard.
Note
If your wireless access point/router supports WPS
(PIN Method) and you want to configure your
machine using the PIN (Personal Identification
Number) Method, see Using the PIN Method of
Wi-Fi Protected Setup in the Network User's
Guide.
d
When the LCD shows Start WPS or AOSS,
press the WPS or AOSS™ button on your
wireless access point/router. See the user's
guide for your wireless access point/router for
instructions.
Then press OK and your machine will now
automatically detect which mode (WPS or
AOSS™) your wireless access point/router
uses and try to connect to your wireless
network.
e
A connection result message appears for
60 seconds on the LCD and a wireless LAN
report will automatically be printed.
If the connection failed, check the error code on
the printed report and refer to Troubleshooting
on page 30.
Wireless setup is now complete. A four
level indicator on the bottom of your
machine's LCD will show the wireless
signal strength of your access
point/router.
To install MFL-Pro Suite, continue to
step 21.
®
For Windows
Users:
Now go to
Page 32
For Macintosh Users:
Now go to
Page 36
29