AEG 62 D6A 06 AA Руководство пользователя - Страница 7
Просмотреть онлайн или скачать pdf Руководство пользователя для Варочная панель AEG 62 D6A 06 AA. AEG 62 D6A 06 AA 28 страниц.
• Disconnect the appliance from the
mains supply.
3. INSTALLATION
WARNING!
Refer to Safety chapters.
3.1 Before the installation
Before you install the hob, write down the
information below from the rating plate.
The rating plate is on the bottom of the
hob.
Serial number ...........................
3.2 Built-in hobs
Only use the built-in hobs after you
assemble the hob into correct built-in
units and work surfaces that align to the
standards.
3.3 Connection cable
• For a single phase or two phase
connection, use the cable type:
H05BB-F or H03V2V2-F which
withstands a temperature of 90 °C or
higher.
• To replace the damaged mains cable,
use the cable: H05BB-F or H03V2V2-
F which withstands a temperature of
90 °C or higher. Contact an
Authorised Service Centre. The
connection cable may only be
replaced by a qualified electrician.
3.4 Assembly
If you install the hob under a hood,
please see the installation instructions of
the hood for the minimum distance
between the appliances.
• Cut off the mains electrical cable
close to the appliance and dispose of
it.
min.
500mm
65 ± 1mm
If the appliance is installed above a
drawer, the hob ventilation can warm up
the items stored in the drawer during the
cooking process.
ENGLISH
7
min.
50mm
55± 1mm
490± 1mm