Brother MFC490CW - Color Inkjet - All-in-One Руководство по быстрой настройке - Страница 22

Просмотреть онлайн или скачать pdf Руководство по быстрой настройке для Принтер "все в одном Brother MFC490CW - Color Inkjet - All-in-One. Brother MFC490CW - Color Inkjet - All-in-One 48 страниц. Mac network connection
Также для Brother MFC490CW - Color Inkjet - All-in-One: Руководство по быстрой настройке (47 страниц), Настройка и установка (5 страниц), Руководство по подключению (6 страниц), Инструкции по ремонту (2 страниц)

Wired Network

Carefully route the network cable through the

trench and out the back of the machine. Then,

connect the cable to your network.

Note

If both USB and LAN cables are being used,

guide both cables through the trench with one on

top of the other.

Important

Make sure that the cable does not restrict the

cover from closing, or an error may occur.

Gently close the scanner cover using the finger

holds on both sides of it.

WARNING

Be careful not to trap your fingers under the

scanner cover.

Always use the finger holds provided on both

sides of the scanner cover when opening and

closing it.

Connect the power cord

Connect the power cord.

Important

If you have previously set up your machine for

a wireless network and then want to set it up

on a wired network, you should check that the

machine's Network I/F is set to Wired LAN.

The wireless network interface will become

inactive with this setting.

On your machine, press Menu.

Press a or b to choose Network and press OK.

Press a or b to choose Network I/F and

press OK.

Press a or b to choose Wired LAN and press

OK.

Press Stop/Exit.

Windows