Brother Work Smart MFC-J470dw Расширенное руководство пользователя - Страница 41

Просмотреть онлайн или скачать pdf Расширенное руководство пользователя для Принтер "все в одном Brother Work Smart MFC-J470dw. Brother Work Smart MFC-J470dw 48 страниц. Printers
Также для Brother Work Smart MFC-J470dw: Air Print Manual (12 страниц), Характеристики (2 страниц), Краткое руководство по эксплуатации (35 страниц), Краткое руководство по эксплуатации (35 страниц), Руководство по быстрой настройке (37 страниц)

Packing and shipping

the machine

When you transport the machine, use the

packing materials that came with your

machine. Follow the instructions below to

correctly package your machine. Damage

caused to your machine during transit may

not be covered by your warranty.

The machine should be adequately insured

with the carrier.

IMPORTANT

It is important to allow the machine to

"park" the print head after a print job.

Listen carefully to the machine before

unplugging it to make sure that all

mechanical noises have stopped. Not

allowing the machine to finish this parking

process may lead to print problems and

possible damage to the print head.

Unplug the machine from the electrical

socket.

Place both hands under the plastic tabs

on both sides of the machine to lift the

scanner cover into the open position.

Then unplug the machine from the

telephone wall socket and take the

telephone line cord out of the machine.

Unplug the interface cable from the

machine, if it is connected.

Lift the scanner cover (1) to release the

lock. Gently push the scanner cover

support down (2) and close the scanner

cover (3) using both hands.

CAUTION

Be careful not to pinch your fingers when

the scanner cover closes.

Open the ink cartridge cover.

Remove all four ink cartridges. Press

the ink release lever above each

cartridge to release it. (See Basic User's

Guide: Replacing the ink cartridges.)

Install the orange protective part, and

then close the ink cartridge cover.

Routine maintenance

3 3