AEG 6530 K Руководство по установке и эксплуатации - Страница 32
Просмотреть онлайн или скачать pdf Руководство по установке и эксплуатации для Варочная панель AEG 6530 K. AEG 6530 K 35 страниц. Built-in cooking surface
Installing and connecting up
Electrical connection
Assembly and connection of the new appliance may only be performed
by an approved installer.
Please observe this instruction, otherwise the warranty will not cover
any damage that may occur.
Only the cable fitted to the cooking surface recess may be used for
connecting up the appliance. Replacement cables can only be obtained
from AEG Customer Service.
A device must be included in the electrical installation that makes it
possible to isolate the appliance from the mains supply with a mini-
mum contact separation of 3 mm. Suitable isolation devices are e.g.
cut-outs, fuses (remove screw type fuses from the holder), earth leak-
age trips and circuit breakers.
1
Important! Make the electrical connection in accordance with the wir-
ing diagram.
1
Attention! Check the connection of the hob to the electrical supply.
If after first connection of the hob
• F 25 is shown in the display and may be the buzzer is summing then
please immediately deconnect the fuse. Check the mains connec-
tion.
Wait 10 seconds from re-connecting the fuse to touching the sensor
inputs.
• none or only 2 cooking zones are working then please immediately
take out the fuse. Check the mains connection.
Wait 10 seconds from re-connecting the fuse to touching the sensor
inputs.
100