Brother DCP-373CW Руководство по быстрой настройке - Страница 29

Просмотреть онлайн или скачать pdf Руководство по быстрой настройке для Принтер Brother DCP-373CW. Brother DCP-373CW 39 страниц. Inkjet dcp/mfc
Также для Brother DCP-373CW: Справочный список деталей (32 страниц), Руководство по быстрой настройке (29 страниц)

Wireless Network

Note

• If there is more than one machine connected to

the network, choose your machine from the list,

and then click Next.

This window will not appear if there is only one

machine connected on the network, it will be

chosen automatically.

• If your wireless settings fail, an error message

will appear during the installation of MFL-Pro

Suite and the installation will be terminated.

Confirm your settings by following the

on-screen instructions. If you encounter this

failure, go to step 11-a on page 23 and setup

the wireless connection again.

• If you are using WEP and the LCD displayed

Connected but your machine is not found,

make sure you entered the WEP key correctly.

The WEP key is case sensitive.

• If the IP address of the machine is not yet

configured for use on your network, the

following screen appears.

Click OK and then click Configure IP

Address. Enter an IP address for your

machine that is suitable for your network by

following the on-screen instructions.

The installation of the Brother drivers will

automatically start. The installation screens

appear one after another.

IMPORTANT

DO NOT cancel any of the screens during the

installation. It may take a few seconds for all

screens to appear.

Note

For Windows Vista

, when this screen appears,

click the check box and click Install to complete

the installation correctly.

When the On-Line Registration screen is

displayed, make your selection and follow the

on-screen instructions.

Windows