Brother DCP-L2540DW Руководство по безопасности продукции - Страница 3

DO NOT place the product near chemicals or in a place where chemicals could be spilled on it.

Should chemicals come into contact with the product, there may be a risk of fire or electric

shock. In particular, organic solvents or liquids such as benzene, paint thinner, polish remover,

or deodorizer may melt or dissolve the plastic cover and/or cables, resulting in a risk of fire or

electric shock. These or other chemicals may also cause the product to malfunction or become

discolored.

DO NOT put the product in a location that blocks or obstructs any slot or opening in the product.

These slots and openings are provided for ventilation. Blocking the product's ventilation could

create a risk of overheating and/or fire.

Instead:

• Keep a minimum gap around the product as shown in the illustration.

4 in.

(100 mm)

• Place the product on a solid level surface.

• DO NOT place this product near or over a radiator or heater.

• DO NOT place this product in a "built-in" installation unless adequate ventilation is provided.

DO install your product near an AC power outlet that is easily accessible. In the event of an

emergency, easy access to the plug and outlet will allow you to shut off power to the product

quickly and completely.

Plastic bags are used in the packing of your product. Plastic bags are not toys. To avoid the

danger of suffocation, keep these bags away from babies and children and dispose of them

properly.

5 in.

(120 mm)

4 in.

(100 mm)

10 in.

(250 mm)

4 in.

(100 mm)

4 in.

(100 mm)