Brother GT-3 Series Руководство по техническому обслуживанию - Страница 4

Просмотреть онлайн или скачать pdf Руководство по техническому обслуживанию для Принтер Brother GT-3 Series. Brother GT-3 Series 17 страниц. Cookbook maintenance
Также для Brother GT-3 Series: Руководство по техническому обслуживанию (16 страниц), Руководство по эксплуатации (15 страниц), Руководство по эксплуатации (12 страниц), Руководство по эксплуатации (18 страниц), Справочное руководство (8 страниц), Справочное руководство (8 страниц), Руководство (3 страниц), Установите (4 страниц)

WEEKLY MAINTENANCE

> WEEKLY MAINTENANCE PROCEDURE

White ink requires weekly maintenance. CMYK ink does not requires weekly mainte-

days

nance. The white ink system requires a weekly cleaning.

The LCD Display will prompt you when the White Tube Cleaning should be performed.

The prompt will appear seven days after the completion of the previous White Tube

Cleaning.

White Tube Cleaning

Maintenance

Select "All Whites" for usual maintenance. This will activate the retrieval solenoid for 4

minutes, to drain the white ink of the tubes back into the white ink cartridges.

After WTC, insert White Filter cartridges or Capping cartridges in the white ink lines.

> CAPPING CARTRIDGES

If you intend to leave the printer idle for longer than the weekend, it is a good idea to put

Capping cartridges instead of Filter cartridges in the white ink lines.

If you don't have those cartridges, use 2 or 4 almost empty white cartridges, they will

keep the line sealed (no air) and prevent the maintenance solution to drip from the PH's.

Don't forget to mark or label those cartridges to avoid confusion !

> How to RESTART after

Shaking White Ink

Maintenance

NZC

PHC

week

White Tube Cleaning

Before Loading the White ink !

Load White

All Whites

After performing the White ink loading,

a nozzle check should be printed.

Please note then 1 week after the

display to perform a new

If you have not printed with white ink and if you still have maintenance

solution in the machine, you can dismiss the message.

All Whites

and follow instructions on the display

W T C

you will be prompted by the

W T C

automatically.