Brother GTX pro Краткое руководство пользователя - Страница 4

Просмотреть онлайн или скачать pdf Краткое руководство пользователя для Принтер Brother GTX pro. Brother GTX pro 15 страниц. Garment printer
Также для Brother GTX pro: Справочное руководство (13 страниц), Руководство пользователя (16 страниц), Руководство по настройке (40 страниц)

CONVEYOR DRYER SETTINGS FOR INK CURING

> Check the REAL temperature with a probe or with strips to ensure that your garments are properly cured

for washability.

NEVER POWER OFF THE PRINTER

VERY IMPORTANT

The Brother GTXpro should ALWAYS be

left with the Power ON. NEVER shut OFF

the printer except if requested by the

display message only. Power is needed to

perform the needed circulation of the white

ink and auto maintenance every day.

In the event that power goes out or your printer has an error during printing, push the Carriage

back all the way to the left to dock it and use the Fixing Pin to lock it in place (see images above).

DAILY AGITATION OF WHITE INK

Perform the procedure shown below if the message "Remove the white ink cartridge and

shake it" is displayed before starting the printing process.

Remove the white ink cartridge from the printer. Shake the cartridge horizontally 100 times side

to side to agitate the white ink. When the ink depletes to the level of approximately 6 inches (15

cm), shake the cartridge with the cover open and the ink pouch unwound which will make the

ink easier to agitate.

Repeat the same process with the other white ink cartridge. Once agitation is complete and

cartridges have been re-inserted, press [Menu/OK] on the control panel.

Conveyor

3:30

Dryer INK

CURING

Minutes

For 1 Minute

320°F

160°C