Brother HL 1270N - B/W Laser Printer Руководство по быстрой настройке сети - Страница 8
Просмотреть онлайн или скачать pdf Руководство по быстрой настройке сети для Принтер Brother HL 1270N - B/W Laser Printer. Brother HL 1270N - B/W Laser Printer 8 страниц. Network quick setup guide - english
Печатать страницу
Troubleshooting
1. Make sure that the printer is powered on, is on-line and ready to print.
2. Check the printer settings by printing the configuration page.
3. If you are still unable to print, check the following:
a. Verify that the cabling and network connection are good. If possible, try connecting
the printer to a different port of your hub using a different piece of cabling.
b. Check the configuration page and look at the Network STATISTICS information to
see if bytes are being transmitted or received. If the values do not increase, your
printer is not receiving or transmitting any data, which suggests a possible network
cable/hub or printer problem.
c. Check to see if there is any LED activity. The print server has three LEDs. These
can be used to diagnose problems.
L-LED (green): Link activity
This LED is on if there is a valid connection to the network (either 10BaseT or
100BaseTX). It is off if no network is detected.
F-LED (orange): Fast Ethernet
This LED will be on if the print server is connected to a 100BaseTX Fast Ethernet
network. It is off if the print server is connected to a 10BaseT network.
A-LED (green): Transmission Activity
This LED will blink as the print server receives or transmits data.
L-LED
F-LED
(green)
(orange)
A-LED
(green)