Brother HL 2030 Руководство по быстрой настройке - Страница 27

Просмотреть онлайн или скачать pdf Руководство по быстрой настройке для Принтер Brother HL 2030. Brother HL 2030 30 страниц. Quick setup guide - english
Также для Brother HL 2030: Руководство по быстрой настройке (30 страниц), Руководство по быстрой настройке (18 страниц), Руководство по эксплуатации (12 страниц)

Web browser

The Brother print server is equipped with a web server that allows you to monitor its status or

change some of its configuration settings, using HTTP (Hyper Text Transfer Protocol).

The User Name is 'admin' and the default Password is 'access'. You can use the web browser to

change this password.

Network User's Guide Chapter 2.

If you wish to reset the print server back to its default factory settings (including password),

please follow these steps:

Turn off the printer.

Make sure that the front cover is closed and the power cord is plugged in.

Hold down the Go button as you turn on the power switch. Keep the Go button pressed down until

the Toner, Drum and Paper LEDs light up. Release the Go button. Make sure that the Toner,

Drum and Paper LEDs are off.

Press the Go button six times. Make sure that all the LEDs light up when the print server has been

reset to its default factory settings.

The Printer Settings Page lists all the current printer settings, including network settings. To

print the Printer Settings Page, press the Go button three times.