LG - Руководство пользователя - Страница 16

Печатать страницу

How to use magic remote

Shake the Magic Remote slightly to the right and left or press

(HOME),

(INPUT),

buttons to make the pointer appear on

the screen.

(In some TV models, the pointer will appear when you turn the

Wheel (OK) button.)

If the pointer has not been used for a certain period of time or Magic

Remote is placed on a flat surface, then the pointer will disappear.

If the pointer is not responding smoothly, you can reset the pointer

by moving it to the edge of the screen.

The Magic Remote depletes batteries faster than a normal remote

due to the additional features.

Precautions to take when using the

magic remote

Use the remote control within the speci ed range (within 10 m).

You may experience communication failures when using the device

outside the coverage area or if there are obstacles within the

coverage area.

You may experience communication failures depending on the

accessories.

Devices such as a microwave oven and wireless LAN operate in the

same frequency band (2.4 GHz) as the Magic Remote. This may

cause communication failures.

The Magic Remote may not work properly if a wireless router (AP)

is within 1 meter of the TV.

Your wireless router should be more than 1 m away from the TV.

Do not disassemble or heat the battery.

Do not drop the battery. Avoid extreme shocks to the battery.

Inserting the battery in the wrong way may result in explosion.

Licenses

Supported licenses may di er by model. For more information about

licenses, visit www.lg.com.

Open source software

notice information

To obtain the source code under GPL, LGPL, MPL, and other open source

licenses, that is contained in this product, please visit http://opensource.

lge.com.

In addition to the source code, all referred license terms, warranty

disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM

for a charge covering the cost of performing such distribution (such

as the cost of media, shipping, and handling) upon email request to

[email protected]. This o er is valid for three (3) years from the date

on which you purchased the product.

Troubleshooting

Cannot control the TV with the remote control.

Check the remote control sensor on the product and try again.

Check if there is any obstacle between the product and the remote

control.

Check if the batteries are still working and properly installed (

to ,

to ).

No image display and no sound is produced.

Check if the product is turned on.

Check if the power cord is connected to a wall outlet.

Check if there is a problem in the wall outlet by connecting other

products.

The TV turns o suddenly.

Check the power control settings. The power supply may be

interrupted.

Check if the Automatic Standby(Depending on model) / Sleep

Timer / Timer Power Off is activated in the TIMERS settings.

If there is no signal while the TV is on, the TV will turn o

automatically after 15 minutes of inactivity.

When connecting to the PC (HDMI), 'No signal' or 'Invalid Format' is

displayed.

Turn the TV o /on using the remote control.

Reconnect the HDMI cable.

Restart the PC with the TV on.