LG 19CNV42K Cloud V Series Руководство пользователя - Страница 32

Просмотреть онлайн или скачать pdf Руководство пользователя для Монитор LG 19CNV42K Cloud V Series. LG 19CNV42K Cloud V Series 50 страниц. Lg cloud v series monitor (led monitor)
Также для LG 19CNV42K Cloud V Series: Руководство пользователя (50 страниц)

Печатать страницу

Using CLOUD Solution

<IPv6> Tab

The IPv6 tab is used when the portal is connected

to the network configured with the IP v6.

y Enable IPv6

If you select Enable IPv6, the portal in use can be

connected to the network configured with the IPv6.

y Link Local Address

The Link Local Address field is automatically filled

with the IP address of a device.

y Gateway

The Gateway field contains the gateway IP ad-

dress of the device. Enter the gateway address to

be used by a device.

y Enable DHCPv6

To assign the Dynamic Host Configuration Protocol

version 6 (DHCPv6) of a device select the Enable

DHCPv6 field.

y DHCPv6 Addresses

When DHCPv6 is enabled and the device restarts,

the server enters the device addresses automati-

cally.

y Primary DNS Server

The Primary DNS Server field contains the pri-

mary DNS IP address of the device. This field is

optional. If DHCPv6 is enabled, this field cannot be

edited.

y Secondary DNS Server

The Secondary DNS Server field contains the sec-

ondary DNS IP address of the device. This field is

optional. If DHCPv6 is enabled, this field cannot

beedited.

y Domain Name

The Domain Name field contains the domain name

used, e.g. "domain local". This field is optional. It

specifies on which domain the host or portal oper-

ates.

y FQDN

The FQDN field represents the Fully Qualified Do-

main Name of the host or portal. The default value

is PCoIP-host-MAC or PCoIP-portal-MAC, where

MAC is the MAC address of the host or portal. If

there is a domain name, it will be added to the

FQDN in the format of PCoIP-host-MAC.domain.

local.

y Enable SLAAC

Select the Enable SLAAC field to use the stateless

auto-configuration of the device.

y Enable Manual Address

Select the Enable Manual Address field to enter

the device address manually.

y Manual Address

In the Manual Address field, enter the IP address

manually.