A-Link v100 Руководство по быстрой установке - Страница 3

Просмотреть онлайн или скачать pdf Руководство по быстрой установке для Сетевой маршрутизатор A-Link v100. A-Link v100 4 страницы.

Start installation:

In defaults V100 VDSL2 -modem have bridged VDSL2 – connection. Modify/check only your computer network

settings as in below has been told and your Internet connection is ready to use.

Note! Make sure before you connect your computer to modem, that you have firewall software installed and turned

on to your computer.

Network settings for Internet connection

(Modify/check these settings when you want to use your computer on Internet)

Windows 2000/XP

1. Go to Start -> Settings -> Network and Dial-Up Connections

2. Move mouse over Local Area Connection icon and press right hand button on mouse. Choose Properties

3. Choose Internet Protocol (TCP/IP) -> Press Properties

4. Choose Obtain an IP address automatically

5. When all necessary settings have been made, press OK.

6. In properties of Internet Protocol (TCP/IP), press OK.

7. Press OK in Network settings.

(If windows need to be restarted, press Yes)

8. Now your workstation is ready for Internet

Windows Vista

1. Go to Start -> Network.

2. Press Network and Sharing Center button and then press Manage network connections link.

3. Move mouse over Local Area Connection icon and press right hand button on mouse. Choose Properties

4. Choose Internet protocol version 4 (TCP/IPv4) -> Press Properties.

5. Choose Obtain an IP address automatically.

6. In properties of Internet Protocol (TCP/IP), press OK.

7. Press OK in Network settings.

8. Now your workstation is ready for Internet

Mac OS

1. Open AppleTalk -controller, choose Ethernet connection

2. Open TCP/IP -controller and modify these settings:

Connection = Ethernet

Definition = DHCP-server

3. Save settings. Now your workstation is ready for Internet

Linux RedHat 8.0

1. Open Start Here from desktop, go to System Settings and Network.

2. In Devices, double click mouse's left hand button on top of your Network adapter and modify these settings:

Choose Automatically obtain IP address settings with: DHCP

Choose Automatically obtain DNS information from provider

3. Press Ok. Now your workstation is ready for Internet