AEG 914 550 925 Руководство пользователя - Страница 22
Просмотреть онлайн или скачать pdf Руководство пользователя для Стиральная машина AEG 914 550 925. AEG 914 550 925 48 страниц.
Печатать страницу
22
www.aeg.com
Useful for people allergic to detergents
and with sensitive skin.
The
indicator shows the selected
number of rinses.
This option increases the programme
duration.
If the Extra Rinse is set as a
default option and you select
a compatible washing
programme, the display
shows
pressing the Extra Rinse
button , it is possible to add
just one rinse.
10.7 Plus Steam
This option adds a steam phase followed
by a short anti-crease phase at the end
of the washing programme.
The steam phase reduces fabric
creasing and facilitates the fabric ironing.
The indicator
during steam phase.
This option can increase the
programme duration.
When the programme stops the display
shows a zero
steady on and the indicator
flashing. The drum performs smooth
movements for about 30 minutes to keep
the steam benefit. By touching any
button the anti-crease movements stop
and the door unlocks.
A small laundry load helps to
reach better results.
10.8 Time Save
With this option you can decrease the
programme duration.
• If your laundry is normally or lightly
soiled, it may be advisable to shorten
the washing programme. Touch this
button once to decrease the duration.
• In case of smaller load, touch this
button twice to set an extra quick
programme.
The display shows the indicator
. In this case, by
flashes on the display
, the indicator
is
starts
.
This option can also be used
to shorten the Steam
programme duration.
10.9 Skipping phase button
(Options)
By touching this button you can set:
• Rinse only at first touch. The washing
programme starts from the rinsing
phase by skipping the wash phase.
All set options (except
permanent extra rinse)
are deselected
automatically.
• Spin only at second touch. The
appliance skips wash and rinse
phase.
• Drain only at third touch. The
appliance performs only the drain
phase.
At firth touch the appliance
proposes the default setting
of the washing programme
again.
10.10 Delay Start
With this option you can delay the start of
a programme in a more convenient time.
Touch the button repeatedly to set the
required delay. The time increases by
steps of 30 minutes up to 90' and from 2
hours up to 20 h.
After touching the Start/Pause button,
the display shows the indicator
the selected delay time and the
appliance begins the countdown.
10.11 Anti-Allergy
Set this option with white Cottons items
programme. When the option is selected,
neither the temperature or the cycle time
can be changed. Option Time Save
and Extra silent
are not available.
The corresponding indicator above the
touch button illuminates.
This option removes micro-organisms
thanks to a washing phase with the
temperature maintained above 60°C for
and