Brother Work Smart MFC-J650dw Вопросы и устранение неполадок
Просмотреть онлайн или скачать pdf Вопросы и устранение неполадок для Принтер Brother Work Smart MFC-J650dw. Brother Work Smart MFC-J650dw 6 страниц. Work smart series inkjet all-in-one
Также для Brother Work Smart MFC-J650dw: Air Print Manual (12 страниц), Характеристики (2 страниц), Базовое руководство пользователя (14 страниц), Краткое руководство по эксплуатации (45 страниц)
Печатать страницу
9/30/2019
MFC-J650DW
FAQs & Troubleshooting
Date: 08/23/2013 ID: faq00002490_023
No Paper Fed
There are several reasons that the Brother machine displays "No paper Fed".
Follow the steps below to clear the "No Paper Fed" message:
Cause 1: The photo bypass tray is located at the wrong position.
Cause 2: The machine is out of paper or paper is not properly loaded in the paper tray
Cause 3: The paper is jammed in the machine
Cause 4: Paper dust has accumulated on the surface of the paper pick-up rollers.
Cause 5: The Jam Clear Cover is not closed properly
Cause 6: The paper tray was not fully inserted.
NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
Cause 1:
The photo bypass tray is located at the wrong position.
If you do not return the photo bypass tray to the Normal printing position after printing photos, you will get a No Paper Fed error when you use cut sheet
paper.
Verify that the Photo Bypass Tray is in the Normal printing position.
Photo Bypass tray in the normal printing position
Photo Bypass tray in the photo printing position
Cause 2:
The Brother machine is out of paper or paper is not properly loaded in the paper tray.
1. Do one of the following:
Refill the paper in the paper tray
Remove the paper and load it again
https://support.brother.com/g/b/faqend.aspx?c=us&lang=en&prod=mfcj650dw_us_eu_as&faqid=faq00002490_023
No Paper Fed | Brother
(Click here to see how to load paper in the paper tray.)
1/6