Brother P-TOUCH CUBE PT-P300BT Руководство пользователя - Страница 14

Просмотреть онлайн или скачать pdf Руководство пользователя для Изготовитель этикеток Brother P-TOUCH CUBE PT-P300BT. Brother P-TOUCH CUBE PT-P300BT 18 страниц. Tze tape
Также для Brother P-TOUCH CUBE PT-P300BT: Руководство пользователя (18 страниц), Руководство пользователя (18 страниц), Руководство пользователя (18 страниц), Руководство пользователя (18 страниц), Руководство пользователя (18 страниц)

3. Inserting the Tape Cassette

Make sure your Tape Cassettes display the TZe mark (

Use only tape widths of 3.5 mm, 6 mm, 9 mm, or 12 mm.

If there is a stopper on the TZe Tape Cassette, remove it before installation.

1. Hold your machine as shown in the

illustration. Open the Cassette Cover

by pressing the mark on its side (1) and

pulling in the direction of the arrow (2).

2. Insert the Tape Cassette following the

drawing marked inside the case.

Confirm that the tape is aimed at the

green Tape Outlet and gently press the

Tape Cassette into your machine until it

locks into place.

NOTE

• Make sure that there is no slack in the

tape. To fix any slack, pull the end of

the tape out of the Tape Guide.

• When inserting or removing the Tape

Cassette, make sure that the tape

does not catch on the silver pin (3) or

the Print Head.

3. Insert the two hooks at the rear of the

Cassette Cover into the slots on your

machine (4). Push the Cassette Cover

making sure it locks into place (5).

End of Tape

Tape Guide

Cassette Cover

Print Head