Brother P-touch H500 Руководство по быстрой настройке - Страница 6
Просмотреть онлайн или скачать pdf Руководство по быстрой настройке для Изготовитель этикеток Brother P-touch H500. Brother P-touch H500 36 страниц.
Печатать страницу
INTRODUCTION
Rechargeable Li-ion Battery (Li-ion battery optional with the H500)
Carefully observe the following precautions for the rechargeable Li-ion battery (hereafter
referred to as "rechargeable battery"), If these precautions are not followed, overheating,
leaking, or cracks in the battery may result in an electrical short, explosion, smoke, fire,
electric shock, injury to yourself or others, or damage to the product or other property.
Use the rechargeable battery only for its
intended purpose. The P-touch and
rechargeable battery are designed to
function exclusively with each other. Do not
insert a different rechargeable battery into
the P-touch or insert the rechargeable
battery into a different P-touch, otherwise
fire or damage may result.
To charge the rechargeable battery,
insert the rechargeable battery into
the P-touch, and then use the AC
adapter designed specifically for this
P-touch.
DO NOT charge the rechargeable battery
near a fire or in direct sunlight. This could
activate the protection circuitry, which is
designed to prevent danger from high heat.
Activation of the protection circuitry could
cause charging to stop, charging to occur
with excessive current or voltage if the
protection circuitry fails, or an abnormal
chemical reaction within the battery.
When charging the rechargeable
battery, use only a battery charger
designed specifically for the
rechargeable battery.
DO NOT allow wires or other metal
objects to come into contact with the
terminals of the rechargeable battery. Do
not carry or store the rechargeable
battery with metal objects such as
necklaces or hairpins. This could cause
an electrical short, and could cause metal
objects to overheat, such as wires,
necklaces, or hairpins to overheat.
6
Safety Precautions
DANGER
DO NOT use or leave the
rechargeable battery near fire,
heaters, or other high temperature
(above 80
DO NOT allow the rechargeable
battery to come into contact with or to
be immersed in water.
DO NOT use the rechargeable battery
in corrosive environments, such as
areas where salty air, salt water,
acids, alkalis, corrosive gases,
chemicals, or any corrosive liquid are
present.
DO NOT use the rechargeable battery
if it is damaged or leaking.
DO NOT directly solder any
connections to the rechargeable
battery. This could cause internal
insulation to melt, gas to be emitted,
or safety mechanisms to fail.
DO NOT use the rechargeable battery
with the polarity (+) (-) reversed.
Check the orientation of the
rechargeable battery before inserting
it, and do not try to force the
rechargeable battery into the P-touch.
Charging the rechargeable battery
with the polarity reversed could cause
an abnormal chemical reaction within
the rechargeable battery or abnormal
current flow during discharge.
DO NOT directly connect the
rechargeable battery to a household
electrical supply.
°
C) locations.