AEG L 7347 FL Руководство пользователя - Страница 15
Просмотреть онлайн или скачать pdf Руководство пользователя для Стиральная машина AEG L 7347 FL. AEG L 7347 FL 28 страниц.
Печатать страницу
9.5 Starting a programme
without delay start
Press Start/Pause:
• The indicator Start/Pause stops to
flash and stays on.
• The indicator
display.
• The programme starts, the door is
locked and the display shows the indi-
cator
.
• The drain pump can operate for a
short time when the appliance fills wa-
ter.
After approximately 15 minutes
from the start of the programme:
• The appliance adjusts auto-
matically the programme dura-
tion agree with the laundry
load.
• The display shows the new val-
ue.
9.6 Starting a programme with
delay start
• Press Zeitvorwahl again and again un-
til the display shows the delay you
want to set. The related indicator
comes on the display.
• Press Start/Pause:
– The appliance starts the countdown.
– When the countdown is completed,
the programme starts automatically.
You can cancel or change the set
of the delay start before you
press Start/Pause .
To cancel the delay start:
1.
Press Start/Pause to set the appli-
ance to pause.
2.
Press Zeitvorwahl until the display
shows
'.
Press Start/Pause again to start the
programme immediately.
9.7 Interrupting a programme
and changing the options
You can change only some options be-
fore they operate.
starts to flash on the
1.
Press Start/Pause. The indicator
flashes.
2.
Change the options.
3.
Press Start/Pause again. The pro-
gramme continues.
9.8 Cancelling a programme
1.
Press Ein/Aus for some seconds to
cancel the programme and to deac-
tivate the appliance.
2.
Press the same button again to acti-
vate the appliance. Now, you can set
a new washing programme.
The appliance does not drain the
water.
9.9 Changing the options
You can change only some options be-
fore they operate.
1.
Press Start/Pause. The related indi-
cator flashes.
2.
Change the options.
3.
Press Start/Pause again. The pro-
gramme continues.
9.10 Opening the door
While a programme or the delay start
operates, the appliance door is locked
and the display shows the indicator
CAUTION!
If the temperature and level of
the water in the drum are too
high, you cannot open the door.
Open the appliance door when the
delay start operates:
1.
Press Start/Pause to pause the appli-
ance.
2.
Wait until the door lock indicator
goes off.
3.
Open the door.
4.
Close the door and press Start/
Pause again. The delay start contin-
ues to operate.
Open the appliance door when the
programme operates:
1.
Press Ein/Aus for some seconds to
deactivate the appliance.
2.
Wait for some minutes and then
open carefully the appliance door.
ENGLISH
15
.