Fujitsu Lifebook MH380 Руководство по биосфере - Страница 15
Просмотреть онлайн или скачать pdf Руководство по биосфере для Ноутбук Fujitsu Lifebook MH380. Fujitsu Lifebook MH380 23 страницы. Mini-notebook
Также для Fujitsu Lifebook MH380: Начало работы (12 страниц)
Печатать страницу
SECURITY MENU – SETTING THE SECURITY FEATURES
The Security menu allows you to set up the data security
features of your notebook to fit your operating needs
and to view the current data security configuration. (See
Navigating through the Setup Utility on page 2 for more
information.)
The following tables show the names of the menu fields
for the Security Menu and its submenus, all the options
for each field, the default settings and a description of
the field's function and any special information needed
to help understand the field's use. The default condition
is no passwords required and no write protection.
Remember your passwords! If you set and
forget your User and Master hard disk
passwords, Fujitsu Computer Systems will
not be able to reset it. You may lose data
and have to replace your system board or
hard disk drive.
Info
Supervisor Password Is:
User Password Is:
Set Supervisor Password
Set User Password
Minimum User Password Length:
Password on Boot:
On Automatic Wake up:
Boot from Removable Media:
Flash Write:
Hard Disk Security
Owner Information
F1
Help
ESC
Exit
Phoenix SecureCore(tm) Setup Utility
System
Advanced
Select Item
-/Space
Select Menu
Enter
Figure 11. Security Menu
■
Entering a password incorrectly 3 times in
a row causes the keyboard and mouse to
be locked out and the warning [System
Disabled] to be displayed. If this hap-
pens, restart the computer by turning off
and on the power with the power switch
(press it continually for at least four sec-
onds), and use the correct password on
reboot.
■
If you make an error when re-entering
the password a Warning will display on
the screen. To try again press [Enter],
then retype the password. Press [Esc] to
abort the password setting process.
Security
Boot
Clear
Clear
Press <Enter> key to
set Supervisor Password
[Enter]
to enable any password
[Enter]
features.
[0]
[Disabled]
Then password entry is
[Disabled]
required to enter BIOS
[All]
Setup.
[Enabled]
Change Values
Select Sub-Menu
S e c u r i t y M e n u
Exit
Item Specific Help
F9
Setup Defaults
F10
Save and Exit
15